После прошивки модем видит,но не подключается

Портативный 3G/4G беспроводной маршрутизатор серии N до 150 мбит\сек
Ответить
ecliipse
Сообщения: 2
Зарегистрирован: 21 дек 2014, 02:56
Страна: Россия

После прошивки модем видит,но не подключается

Сообщение ecliipse » 21 дек 2014, 03:43

Аппаратная версия устройства: v1
Версия прошивки: OpenWRT R40862
Ваша страна: Россия
Название провайдера: Билайн
Скорость по тарифу: 3g
Подключение с ПК по wifi или по кабелю?: по wifi или по кабелю
Если наблюдаются разрывы, то как часто?: нет
Наблюдается проблема, когда нет нагрузки?: нет
Что пишется в статусе Вашего подключения при проблеме?: нет интернета
Наблюдается ли проблема при подключении без роутера?: нет
Ваша операционная система: Windows 7
Антивирусные программы и фаерволы: microsoft
Логи оборудования: Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.010000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.070000] PPP generic driver version 2.4.2
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.070000] NET: Registered protocol family 24
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.080000] usbcore: registered new interface driver sierra
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.080000] usbserial: USB Serial support registered for Sierra USB modem
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.130000] usbcore: registered new interface driver option
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.130000] usbserial: USB Serial support registered for GSM modem (1-port)
Tue Dec 2 20:38:32 2014 kern.debug kernel: [ 11.170000] ath: EEPROM regdomain: 0x0
Tue Dec 2 20:38:32 2014 kern.debug kernel: [ 11.170000] ath: EEPROM indicates default country code should be used
Tue Dec 2 20:38:32 2014 kern.debug kernel: [ 11.170000] ath: doing EEPROM country->regdmn map search
Tue Dec 2 20:38:32 2014 kern.debug kernel: [ 11.170000] ath: country maps to regdmn code: 0x3a
Tue Dec 2 20:38:32 2014 kern.debug kernel: [ 11.170000] ath: Country alpha2 being used: US
Tue Dec 2 20:38:32 2014 kern.debug kernel: [ 11.170000] ath: Regpair used: 0x3a
Tue Dec 2 20:38:32 2014 kern.debug kernel: [ 11.180000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.190000] cfg80211: Calling CRDA for country: US
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.190000] cfg80211: Regulatory domain changed to country: US
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.200000] cfg80211: DFS Master region: FCC
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.200000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.210000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.220000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.230000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.240000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.240000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Tue Dec 2 20:38:32 2014 kern.info kernel: [ 11.250000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Tue Dec 2 20:38:32 2014 user.emerg syslog: Error: Failed to connect to ubus
Tue Dec 2 20:38:36 2014 authpriv.info dropbear[769]: Not backgrounding
Tue Dec 2 20:38:37 2014 user.notice usb-modeswitch: Remove Early Modeswitch
Tue Dec 2 20:38:37 2014 user.emerg syslog: setting up led USB
Tue Dec 2 20:38:37 2014 user.emerg syslog: setting up led WLAN
Tue Dec 2 20:38:37 2014 user.emerg syslog: setting up led LAN
Tue Dec 2 20:38:38 2014 user.notice ROOter Initialize: Initializing Rooter
Tue Dec 2 20:38:38 2014 user.emerg syslog: Usage: uci [<options>] <command> [<arguments>]
Tue Dec 2 20:38:38 2014 user.emerg syslog:
Tue Dec 2 20:38:38 2014 user.emerg syslog: Commands:
Tue Dec 2 20:38:38 2014 user.emerg syslog: batch
Tue Dec 2 20:38:38 2014 user.emerg syslog: export [<config>]
Tue Dec 2 20:38:38 2014 user.emerg syslog: import [<config>]
Tue Dec 2 20:38:38 2014 user.emerg syslog: changes [<config>]
Tue Dec 2 20:38:38 2014 user.emerg syslog: commit [<config>]
Tue Dec 2 20:38:38 2014 user.emerg syslog: add <config> <section-type>
Tue Dec 2 20:38:38 2014 user.emerg syslog: add_list <config>.<section>.<option>=<string>
Tue Dec 2 20:38:38 2014 user.emerg syslog: del_list <config>.<section>.<option>=<string>
Tue Dec 2 20:38:38 2014 user.emerg syslog: uci: Entry not found
Tue Dec 2 20:38:38 2014 user.emerg syslog: ifconfig: eth1: error fetching interface information: Device not found
Tue Dec 2 20:38:39 2014 user.emerg syslog: uci: Entry not found
Tue Dec 2 20:38:39 2014 user.emerg syslog: uci: Entry not found
Tue Dec 2 20:38:39 2014 kern.info kernel: [ 21.110000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Tue Dec 2 20:38:39 2014 kern.info kernel: [ 21.120000] device eth0 entered promiscuous mode
Tue Dec 2 20:38:39 2014 kern.info kernel: [ 21.120000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Tue Dec 2 20:38:39 2014 daemon.notice netifd: Interface 'lan' is enabled
Tue Dec 2 20:38:39 2014 daemon.notice netifd: Interface 'lan' is setting up now
Tue Dec 2 20:38:39 2014 user.emerg syslog: Warning: Unable to locate ipset utility, disabling ipset support
Tue Dec 2 20:38:39 2014 daemon.notice netifd: Interface 'lan' is now up
Tue Dec 2 20:38:39 2014 daemon.notice netifd: Interface 'loopback' is enabled
Tue Dec 2 20:38:39 2014 daemon.notice netifd: Network device 'lo' link is up
Tue Dec 2 20:38:39 2014 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Dec 2 20:38:39 2014 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Dec 2 20:38:39 2014 daemon.notice netifd: Interface 'loopback' is now up
Tue Dec 2 20:38:39 2014 daemon.warn odhcpd[734]: Failed to send to ff02::1%br-lan (Cannot assign requested address)
Tue Dec 2 20:38:39 2014 daemon.warn odhcpd[734]: Failed to send to ff02::1%br-lan (Cannot assign requested address)
Tue Dec 2 20:38:39 2014 user.emerg syslog: Warning: Section @zone[1] (wan) cannot resolve device of network 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: Warning: Section @zone[1] (wan) cannot resolve device of network 'wan1'
Tue Dec 2 20:38:39 2014 user.emerg syslog: Warning: Section @zone[1] (wan) cannot resolve device of network 'wan2'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Flushing IPv4 filter table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Flushing IPv4 nat table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Flushing IPv4 mangle table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Flushing IPv4 raw table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Flushing IPv6 filter table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Flushing IPv6 mangle table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Flushing IPv6 raw table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Flushing conntrack table ...
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Populating IPv4 filter table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'lan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Rule 'Allow-DHCP-Renew'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Rule 'Allow-Ping'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Forward 'lan' -> 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Populating IPv4 nat table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'lan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Populating IPv4 mangle table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'lan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Populating IPv4 raw table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'lan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Populating IPv6 filter table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'lan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Rule 'Allow-DHCPv6'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Rule 'Allow-ICMPv6-Input'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Rule 'Allow-ICMPv6-Forward'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Forward 'lan' -> 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Populating IPv6 mangle table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'lan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Populating IPv6 raw table
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'lan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Zone 'wan'
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Set tcp_ecn to off
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Set tcp_syncookies to on
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Set tcp_window_scaling to on
Tue Dec 2 20:38:39 2014 user.emerg syslog: * Running script '/etc/firewall.user'
Tue Dec 2 20:38:40 2014 kern.info kernel: [ 22.020000] usb 1-1: USB disconnect, device number 2
Tue Dec 2 20:38:41 2014 kern.info kernel: [ 22.620000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Tue Dec 2 20:38:41 2014 kern.info kernel: [ 22.620000] device wlan0 entered promiscuous mode
Tue Dec 2 20:38:41 2014 kern.info kernel: [ 22.640000] br-lan: port 2(wlan0) entered forwarding state
Tue Dec 2 20:38:41 2014 kern.info kernel: [ 22.640000] br-lan: port 2(wlan0) entered forwarding state
Tue Dec 2 20:38:41 2014 kern.info kernel: [ 22.650000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Tue Dec 2 20:38:41 2014 daemon.notice netifd: Bridge 'br-lan' link is up
Tue Dec 2 20:38:41 2014 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Dec 2 20:38:41 2014 kern.info kernel: [ 22.660000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Tue Dec 2 20:38:41 2014 daemon.notice netifd: Network device 'wlan0' link is up
Tue Dec 2 20:38:42 2014 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Dec 2 20:38:42 2014 user.emerg syslog: - init complete -
Tue Dec 2 20:38:43 2014 kern.info kernel: [ 24.640000] br-lan: port 2(wlan0) entered forwarding state
Tue Dec 2 20:38:48 2014 daemon.info dnsmasq[1043]: started, version 2.71 cachesize 150
Tue Dec 2 20:38:48 2014 daemon.info dnsmasq[1043]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
Tue Dec 2 20:38:48 2014 daemon.info dnsmasq-dhcp[1043]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Tue Dec 2 20:38:48 2014 daemon.info dnsmasq[1043]: using local addresses only for domain lan
Tue Dec 2 20:38:48 2014 daemon.warn dnsmasq[1043]: no servers found in /tmp/resolv.conf.auto, will retry
Tue Dec 2 20:38:48 2014 daemon.info dnsmasq[1043]: read /etc/hosts - 1 addresses
Tue Dec 2 20:38:48 2014 daemon.info dnsmasq-dhcp[1043]: read /etc/ethers - 0 addresses
Tue Dec 2 20:38:49 2014 kern.info kernel: [ 31.320000] usb 1-1: new high-speed USB device number 3 using ehci-platform
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: Add : 1-1: Manufacturer=Spreadtrum Product=HSPA+_USB_Modem Serial=? 1bbb 022c
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: * Start of Modem Detection and Connection Information
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: * Product=HSPA+_USB_Modem 1bbb 022c
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: * This device does not have a switch data file
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: * Product=HSPA+_USB_Modem 1bbb 022c
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:38:53 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: * Switched to : 1bbb:022c
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:03 2014 user.notice Log Print : Driver Name : 1
Tue Dec 2 20:39:03 2014 user.notice Log Print : Driver Name : 2
Tue Dec 2 20:39:03 2014 user.notice Log Print : Driver Name : 3
Tue Dec 2 20:39:03 2014 user.notice Log Print : Driver Name : 4
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: * ProtoFind returns : 0
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:03 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:04 2014 user.notice usb-modeswitch: Ignoring Linux Hub
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: Add : 1-1: Manufacturer=Spreadtrum Product=HSPA+_USB_Modem Serial=? 1bbb 022c
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: * Start of Modem Detection and Connection Information
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: * Product=HSPA+_USB_Modem 1bbb 022c
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: * This device does not have a switch data file
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: * Product=HSPA+_USB_Modem 1bbb 022c
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:13 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:23 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:23 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:23 2014 user.notice usb-modeswitch: * Switched to : 1bbb:022c
Tue Dec 2 20:39:23 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:23 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:23 2014 user.notice Log Print : Driver Name : 1
Tue Dec 2 20:39:23 2014 user.notice Log Print : Driver Name : 2
Tue Dec 2 20:39:24 2014 user.notice Log Print : Driver Name : 3
Tue Dec 2 20:39:24 2014 user.notice Log Print : Driver Name : 4
Tue Dec 2 20:39:24 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:24 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:24 2014 user.notice usb-modeswitch: * ProtoFind returns : 0
Tue Dec 2 20:39:24 2014 user.notice usb-modeswitch: *
Tue Dec 2 20:39:24 2014 user.notice usb-modeswitch: *****************************************************************
Tue Dec 2 20:39:52 2014 daemon.info hostapd: wlan0: STA 9c:d6:43:32:ac:9b IEEE 802.11: authenticated
Tue Dec 2 20:39:52 2014 daemon.info hostapd: wlan0: STA 9c:d6:43:32:ac:9b IEEE 802.11: associated (aid 1)
Tue Dec 2 20:39:54 2014 daemon.info dnsmasq[1043]: read /etc/hosts - 1 addresses
Tue Dec 2 20:39:54 2014 daemon.info dnsmasq[1043]: read /tmp/hosts/dhcp - 0 addresses
Tue Dec 2 20:39:54 2014 daemon.info dnsmasq[1043]: read /tmp/hosts/odhcpd - 1 addresses
Tue Dec 2 20:39:54 2014 daemon.info dnsmasq-dhcp[1043]: read /etc/ethers - 0 addresses
Tue Dec 2 20:39:59 2014 daemon.info dnsmasq-dhcp[1043]: BOOTP(br-lan) 00:ab:00:00:00:00 no address configured
Tue Dec 2 20:40:21 2014 kern.info kernel: [ 122.760000] eth0: link up (100Mbps/Full duplex)
Tue Dec 2 20:40:21 2014 kern.info kernel: [ 122.760000] br-lan: port 1(eth0) entered forwarding state
Tue Dec 2 20:40:21 2014 kern.info kernel: [ 122.770000] br-lan: port 1(eth0) entered forwarding state
Tue Dec 2 20:40:21 2014 kern.info kernel: [ 122.770000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Tue Dec 2 20:40:21 2014 daemon.notice netifd: Network device 'eth0' link is up
Tue Dec 2 20:40:23 2014 daemon.info dnsmasq[1043]: read /etc/hosts - 1 addresses
Tue Dec 2 20:40:23 2014 daemon.info dnsmasq[1043]: read /tmp/hosts/dhcp - 0 addresses
Tue Dec 2 20:40:23 2014 daemon.info dnsmasq[1043]: read /tmp/hosts/odhcpd - 2 addresses
Tue Dec 2 20:40:23 2014 daemon.info dnsmasq-dhcp[1043]: read /etc/ethers - 0 addresses
Tue Dec 2 20:40:23 2014 kern.info kernel: [ 124.770000] br-lan: port 1(eth0) entered forwarding state
Tue Dec 2 20:40:25 2014 daemon.info dnsmasq-dhcp[1043]: DHCPREQUEST(br-lan) 192.168.1.196 00:22:15:ae:20:26
Tue Dec 2 20:40:25 2014 daemon.info dnsmasq-dhcp[1043]: DHCPACK(br-lan) 192.168.1.196 00:22:15:ae:20:26 Ecliipse-PC
Tue Dec 2 20:40:25 2014 daemon.info dnsmasq-dhcp[1043]: DHCPREQUEST(br-lan) 192.168.1.196 00:22:15:ae:20:26
Tue Dec 2 20:40:25 2014 daemon.info dnsmasq-dhcp[1043]: DHCPACK(br-lan) 192.168.1.196 00:22:15:ae:20:26 Ecliipse-PC
Tue Dec 2 20:40:30 2014 daemon.info dnsmasq-dhcp[1043]: DHCPINFORM(br-lan) 192.168.1.196 00:22:15:ae:20:26
Tue Dec 2 20:40:30 2014 daemon.info dnsmasq-dhcp[1043]: DHCPACK(br-lan) 192.168.1.196 00:22:15:ae:20:26 Ecliipse-PC
Tue Dec 2 20:41:53 2014 daemon.info dnsmasq-dhcp[1043]: DHCPINFORM(br-lan) 192.168.1.196 00:22:15:ae:20:26
Tue Dec 2 20:41:53 2014 daemon.info dnsmasq-dhcp[1043]: DHCPACK(br-lan) 192.168.1.196 00:22:15:ae:20:26 Ecliipse-PC
Tue Dec 2 20:41:59 2014 kern.info kernel: [ 221.290000] device wlan0 left promiscuous mode
Tue Dec 2 20:41:59 2014 kern.info kernel: [ 221.290000] br-lan: port 2(wlan0) entered disabled state
Tue Dec 2 20:41:59 2014 daemon.notice netifd: Network device 'wlan0' link is down
Tue Dec 2 20:42:01 2014 kern.info kernel: [ 222.900000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Tue Dec 2 20:42:01 2014 kern.info kernel: [ 223.240000] device wlan0 entered promiscuous mode
здравствуйте! приобрел модем алкатель X602D, после прошивки на OpenWRT R40862 иногда определяется (при включении в сеть,иногда) и отображается уровень сигнала, индикатор на роутере при этом горит.
но вот к инету подключиться не могу. пробовал прописать настройки в меню модем инфо-не помогло ,метод научного тыка тоже не помог,нервы на исходе.
Последний раз редактировалось ecliipse 22 дек 2014, 01:35, всего редактировалось 1 раз.

Cenobit
Лучший пользователь 2013-2017
Лучший пользователь 2013-2017
Сообщения: 2737
Зарегистрирован: 24 июн 2013, 05:57
Страна: Россия

Re:

Сообщение Cenobit » 21 дек 2014, 08:39

В списке поддерживаемых модемов он отсутствует.Только альтернативная прошивка роутера в помощь.
TL-MR3220 v2 + Huawei E3372, ZTE MF823

Ответить

Вернуться в «TL-MR3020»