Настройка CPE610

[tvsat]

Название темы: Настройка CPE610
Аппаратная версия устройства: v.2
Версия встроенного ПО: 2.2.7 Build 20230907 Rel. 37165 (0000)
Режим работы: Точка доступа
Описание проблемы: В настройках Wi-Fi - Основные настройки беспроводного режима - Антенна
есть такие параметры:
- Только облучатель - 7dBi
- 23dBi
Подскажите для чего они и что лучше выбирать на Точке и Клиенте ?

[Lloyd]

In the Wi-Fi settings of the CPE610, the "Antenna" options refer to the gain settings for the antenna connected to the device. The gain of an antenna determines its ability to focus signal strength in a particular direction.

"Feeder only - 7dBi" likely indicates that only the feeder antenna is active, and it has a gain of 7dBi.
"23dBi" suggests that both the feeder and external antennas are active, with the external antenna having a gain of 23dBi.
In general, the higher the gain of the antenna, the more directional the signal becomes. Higher gain antennas are useful for long-distance point-to-point connections or when trying to overcome obstacles like trees or buildings.

For Point-to-Point (PtP) configurations, where you are trying to establish a link between two CPE610 devices over a long distance, using the 23dBi option may be preferable as it provides higher gain and better signal directionality for longer-range communication.
doodle jump
For Client (station) configurations, where the CPE610 is connecting to an existing Wi-Fi network as a client device, the optimal choice depends on the specific requirements of the network and the distance to the access point. In most cases, the default settings or a moderate gain option like "Feeder only - 7dBi" may suffice, especially for shorter distances.

Ultimately, the best option depends on factors such as the distance between devices, obstructions in the signal path, and desired signal strength. It may require some experimentation and testing to determine the most suitable antenna gain setting for your specific deployment scenario.