Страница 2 из 2

TL-MR3020+Huawei E1500+МТС/Мегафон

Добавлено: 16 июл 2012, 19:08
lpm00
Аппаратная версия устройства: 3.12.11
Версия прошивки: 111128
Ваша страна: Россия
Название провайдера: МТС
Подключение с ПК по wifi или по кабелю?: wifi и кабель
Что пишется в статусе Вашего подключения при проблеме?: Нет интернета
Ваша операционная система: Windows 7
Логи оборудования: ####################################################################
# TL-MR3020 System Log
# Time = 1970-01-01 0:02:20 141s
# H-Ver = MR3020 v1 00000000 : S-Ver = 3.12.11 Build 111128 Rel.34725n
# L = 192.168.0.254 : M = 255.255.255.0
# 3G : 3G = 0.0.0.0 : M = 0.0.0.0 : G = 0.0.0.0
####################################################################

1st day 00:00:07 OTHER INFO System started
1st day 00:00:16 DHCP NOTICE DHCP server started
1st day 00:00:16 SECURITY INFO PPTP Passthrough enabled
1st day 00:00:16 SECURITY INFO L2TP Passthrough enabled
1st day 00:00:16 SECURITY INFO IPSEC Passthrough enabled
1st day 00:00:17 SECURITY INFO FTP ALG enabled
1st day 00:00:17 SECURITY INFO TFTP ALG enabled
1st day 00:00:17 SECURITY INFO H323 ALG enabled
1st day 00:00:17 SECURITY INFO RTSP ALG enabled
1st day 00:00:33 3G INFO 3G Modem vendorID: 0x12d1; productID: 0x1001
1st day 00:00:33 3G INFO 3G Modem vendorID: 0x12d1; productID: 0x1001
1st day 00:00:40 DHCP NOTICE DHCPS:Recv REQUEST from 48:5D:60:6E:33:26
1st day 00:00:41 DHCP NOTICE DHCPS:Send ACK to 192.168.0.101
1st day 00:00:44 DHCP NOTICE DHCPS:Recv INFORM from 48:5D:60:6E:33:26
1st day 00:00:44 3G INFO Main interface_index[0] = 0
1st day 00:00:44 3G INFO Vice interface_index[1] = 2
1st day 00:00:45 3G INFO Main interface_index[0] = 0
1st day 00:00:45 3G INFO Vice interface_index[1] = 2
1st day 00:00:45 3G INFO USB modem is ready
1st day 00:00:46 3G INFO USB modem is ready
1st day 00:00:48 PPP NOTICE Standard authentication.
1st day 00:00:48 3G INFO Run 3G dial cmd: pppd /dev/ttyUSB0 115200 connect "chat -V -E -f /etc/ppp/conn-s
1st day 00:00:49 PPP NOTICE Standard authentication.
1st day 00:00:49 3G INFO Run 3G dial cmd: pppd /dev/ttyUSB2 115200 connect "chat -V -E -f /etc/ppp/conn-s
1st day 00:00:51 PPP INFO sent [LCP Req mru=1480 asyncmap=0x0 magic=0x124329d6]
1st day 00:00:54 PPP INFO sent [LCP Req mru=1480 asyncmap=0x0 magic=0x124329d6]
1st day 00:00:57 PPP INFO sent [LCP Req mru=1480 asyncmap=0x0 magic=0x124329d6]
1st day 00:01:00 PPP INFO sent [LCP Req mru=1480 asyncmap=0x0 magic=0x124329d6]
1st day 00:01:03 PPP INFO sent [LCP Req mru=1480 asyncmap=0x0 magic=0x124329d6]
1st day 00:01:06 PPP INFO sent [LCP Req mru=1480 asyncmap=0x0 magic=0x124329d6]
1st day 00:01:09 PPP INFO sent [LCP Req mru=1480 asyncmap=0x0 magic=0x124329d6]
1st day 00:01:12 PPP INFO sent [LCP Req mru=1480 asyncmap=0x0 magic=0x124329d6]
1st day 00:01:15 PPP INFO sent [LCP Req mru=1480 asyncmap=0x0 magic=0x124329d6]
1st day 00:01:18 PPP INFO sent [LCP Req mru=1480 asyncmap=0x0 magic=0x124329d6]
1st day 00:01:21 3G NOTICE 3G Modem connecting error, please check the dial number and APN.
1st day 00:01:21 3G INFO mobileCmdReq 313 mobileFormatCmd error
1st day 00:01:22 PPP NOTICE Standard authentication.
1st day 00:01:22 3G INFO Run 3G dial cmd: pppd /dev/ttyUSB0 115200 connect "chat -V -E -f /etc/ppp/conn-s
1st day 00:01:25 PPP NOTICE Standard authentication.
1st day 00:01:25 3G INFO Run 3G dial cmd: pppd /dev/ttyUSB2 115200 connect "chat -V -E -f /etc/ppp/conn-s
1st day 00:01:26 3G NOTICE Modem switchs failed, reset the 3G modem, please wait.
1st day 00:01:28 3G INFO mobileCmdReq 313 mobileFormatCmd error
1st day 00:01:29 3G INFO 3G Modem is plugged out.
1st day 00:01:32 3G INFO 3G Modem vendorID: 0x12d1; productID: 0x1001
1st day 00:01:43 3G INFO Main interface_index[0] = 0
1st day 00:01:43 3G INFO Vice interface_index[1] = 2
1st day 00:01:44 3G INFO USB modem is ready
1st day 00:01:44 PPP NOTICE Standard authentication.
1st day 00:01:44 3G INFO Run 3G dial cmd: pppd /dev/ttyUSB0 115200 connect "chat -V -E -f /etc/ppp/conn-s
1st day 00:01:45 PPP NOTICE Standard authentication.
1st day 00:01:45 3G INFO Run 3G dial cmd: pppd /dev/ttyUSB2 115200 connect "chat -V -E -f /etc/ppp/conn-s
1st day 00:01:46 3G NOTICE 3G Modem connecting error, please check the dial number and APN.
1st day 00:01:46 3G INFO mobileCmdReq 313 mobileFormatCmd error

##########################################################################################
Thu Jan 1 00:00:31 1970,devices/LteDeviceList.c[55](lteDevicesList_init): init_logger
Thu Jan 1 00:00:31 1970,log/logger.c[202](set_logger): received parameter value
level=4 mode=2 log_size= 100 module=0
Thu Jan 1 00:00:31 1970,log/logger.c[210](set_logger): after modified parameter value
level=4 mode=2 log_size= 100 module=0
Thu Jan 1 00:00:31 1970,devices/LteDeviceList.c[58](lteDevicesList_init): Function lteDevicesList_init call.
Thu Jan 1 00:00:31 1970,link/link.c[29](LINKLIST_init): Function LINKLIST_init call.
Thu Jan 1 00:00:31 1970,devices/lg_vl600.c[76](lg_vl600_init): Function lg_vl600_init call.
Thu Jan 1 00:00:31 1970,devices/LteDeviceList.c[183](addALTEDevice): Function addALTEDevice call.
Thu Jan 1 00:00:31 1970,link/link.c[47](LINK_new): Function LINK_new call.
Thu Jan 1 00:00:31 1970,link/link.c[92](LINKLIST_insert): Function LINKLIST_insert call.
Thu Jan 1 00:00:31 1970,devices/lg_vl600.c[77](lg_vl600_init): REGISTER A LTE DEVICE SUCESSFULL
Thu Jan 1 00:00:31 1970,devices/commDev.c[90](getLteDevName): Function getLteDevName call.
Thu Jan 1 00:00:31 1970,devices/lg_vl600.c[78](lg_vl600_init): LG_VL600 init.
Thu Jan 1 00:00:31 1970,devices/usb551l.c[68](usb551l_init): Function usb551l_init call.
Thu Jan 1 00:00:31 1970,devices/LteDeviceList.c[183](addALTEDevice): Function addALTEDevice call.
Thu Jan 1 00:00:31 1970,link/link.c[47](LINK_new): Function LINK_new call.
Thu Jan 1 00:00:31 1970,link/link.c[92](LINKLIST_insert): Function LINKLIST_insert call.
Thu Jan 1 00:00:31 1970,devices/usb551l.c[69](usb551l_init): REGISTER A LTE DEVICE SUCESSFULL
Thu Jan 1 00:00:31 1970,devices/commDev.c[90](getLteDevName): Function getLteDevName call.
Thu Jan 1 00:00:31 1970,devices/usb551l.c[70](usb551l_init): USB551L init.
Thu Jan 1 00:00:31 1970,devices/qmilte.c[80](qmiLte_init): Function qmiLte_init call.
Thu Jan 1 00:00:31 1970,devices/LteDeviceList.c[183](addALTEDevice): Function addALTEDevice call.
Thu Jan 1 00:00:31 1970,link/link.c[47](LINK_new): Function LINK_new call.
Thu Jan 1 00:00:31 1970,link/link.c[92](LINKLIST_insert): Function LINKLIST_insert call.
Thu Jan 1 00:00:31 1970,devices/qmilte.c[81](qmiLte_init): REGISTER A LTE DEVICE SUCESSFULL
Thu Jan 1 00:00:31 1970,devices/commDev.c[90](getLteDevName): Function getLteDevName call.
Thu Jan 1 00:00:31 1970,devices/qmilte.c[82](qmiLte_init): QmiLte init.
Thu Jan 1 00:00:31 1970,devices/yotalu150.c[119](yotaLu150_init): Function yotaLu150_init call.
Thu Jan 1 00:00:31 1970,devices/LteDeviceList.c[183](addALTEDevice): Function addALTEDevice call.
Thu Jan 1 00:00:31 1970,link/link.c[47](LINK_new): Function LINK_new call.
Thu Jan 1 00:00:31 1970,link/link.c[92](LINKLIST_insert): Function LINKLIST_insert call.
Thu Jan 1 00:00:31 1970,devices/yotalu150.c[120](yotaLu150_init): REGISTER A LTE DEVICE SUCESSFULL
Thu Jan 1 00:00:31 1970,devices/commDev.c[90](getLteDevName): Function getLteDevName call.
Thu Jan 1 00:00:31 1970,devices/yotalu150.c[121](yotaLu150_init): init.
Thu Jan 1 00:00:49 1970,atCmdSet.c[171](sendAtCmdAndJudgeResponeBuf): Function sendAtCmdAndJudgeResponeBuf call.
Thu Jan 1 00:00:49 1970,atCmdSet.c[34](openDevSerialPort): Function openDevSerialPort call.
Thu Jan 1 00:00:49 1970,atCmdSet.c[46](openDevSerialPort): open /dev/ttyUSB0 sucess.@[fd is 27]
Thu Jan 1 00:00:49 1970,atCmdSet.c[187](sendAtCmdAndJudgeResponeBuf): Open tty sucessfull@/dev/ttyUSB0.
Thu Jan 1 00:00:49 1970,atCmdSet.c[72](setTermiosAttr): Function setTermiosAttr call.
Thu Jan 1 00:00:49 1970,atCmdSet.c[116](readSerialBuf): Function readSerialBuf call.
Thu Jan 1 00:00:49 1970,atCmdSet.c[194](sendAtCmdAndJudgeResponeBuf): Send AT Command
Thu Jan 1 00:00:49 1970,atCmdSet.c[100](writeSerialBuf): Function writeSerialBuf call.
Thu Jan 1 00:00:49 1970,atCmdSet.c[116](readSerialBuf): Function readSerialBuf call.
Thu Jan 1 00:00:50 1970,atCmdSet.c[244](parseResponseBuf): buffer is at+cimi

250015630364354

OK
, nread = 33
Thu Jan 1 00:00:50 1970,atCmdSet.c[255](parseResponseBuf): buffer is at+cimi

250015630364354

OK

Thu Jan 1 00:00:50 1970,atCmdSet.c[272](parseResponseBuf): Respone data OK, buffer = at+cimi

250015630364354

OK

Thu Jan 1 00:00:50 1970,mobileInit.c[227](mobileGenCfgFile): ISP=, APM = internet.mts.ru, dialNum = *99#, username = mts, password = mts
Thu Jan 1 00:00:50 1970,mobileInit.c[735](mobileFormatCmd): l_work_index = -1
Thu Jan 1 00:00:50 1970,mobileInit.c[746](mobileFormatCmd): ret = 0, l_index = 1
Thu Jan 1 00:00:50 1970,mobileInit.c[752](mobileFormatCmd): ret = 0, l_index = 1, interface = 0
Thu Jan 1 00:00:50 1970,atCmdSet.c[171](sendAtCmdAndJudgeResponeBuf): Function sendAtCmdAndJudgeResponeBuf call.
Thu Jan 1 00:00:50 1970,atCmdSet.c[34](openDevSerialPort): Function openDevSerialPort call.
Thu Jan 1 00:00:50 1970,atCmdSet.c[46](openDevSerialPort): open /dev/ttyUSB0 sucess.@[fd is 27]
Thu Jan 1 00:00:50 1970,atCmdSet.c[187](sendAtCmdAndJudgeResponeBuf): Open tty sucessfull@/dev/ttyUSB0.
Thu Jan 1 00:00:50 1970,atCmdSet.c[72](setTermiosAttr): Function setTermiosAttr call.
Thu Jan 1 00:00:50 1970,atCmdSet.c[116](readSerialBuf): Function readSerialBuf call.
Thu Jan 1 00:00:50 1970,atCmdSet.c[194](sendAtCmdAndJudgeResponeBuf): Send AT Command
Thu Jan 1 00:00:50 1970,atCmdSet.c[100](writeSerialBuf): Function writeSerialBuf call.
Thu Jan 1 00:00:50 1970,atCmdSet.c[116](readSerialBuf): Function readSerialBuf call.
Thu Jan 1 00:00:51 1970,atCmdSet.c[244](parseResponseBuf): buffer is at+CSQ

+CSQ: 99,99

OK
, nread = 28
Thu Jan 1 00:00:51 1970,atCmdSet.c[255](parseResponseBuf): buffer is at+CSQ

+CSQ: 99,99

OK

Thu Jan 1 00:00:51 1970,atCmdSet.c[272](parseResponseBuf): Respone data OK, buffer = at+CSQ

+CSQ: 99,99

OK

Thu Jan 1 00:00:51 1970,mobileInit.c[1076](mobileFormatCmd): dail cmd = pppd 3g 1 /dev/ttyUSB0 115200 connect "chat -s -v -f /etc/ppp/conn-script" disconnect "chat -s -v -f /etc/ppp/disconn-script" defaultroute noaccomp nopcomp lcp-echo-failure 20 lcp-echo-interval 60 httpd-pid 562 user_len 3 passwd_len 3 special-flag 100 mru 1480 mtu 1480 usepeerdns noipdefault ipcp-accept-local ipcp-accept-remote unit 0
Thu Jan 1 00:01:18 1970,mobileInit.c[227](mobileGenCfgFile): ISP=, APM = internet.mts.ru, dialNum = *99#, username = mts, password = mts
Thu Jan 1 00:01:18 1970,mobileInit.c[735](mobileFormatCmd): l_work_index = -1
Thu Jan 1 00:01:18 1970,mobileInit.c[746](mobileFormatCmd): ret = 0, l_index = 2
Thu Jan 1 00:01:18 1970,mobileInit.c[752](mobileFormatCmd): ret = 0, l_index = 2, interface = 2
Thu Jan 1 00:01:18 1970,atCmdSet.c[171](sendAtCmdAndJudgeResponeBuf): Function sendAtCmdAndJudgeResponeBuf call.
Thu Jan 1 00:01:18 1970,atCmdSet.c[34](openDevSerialPort): Function openDevSerialPort call.
Thu Jan 1 00:01:18 1970,atCmdSet.c[46](openDevSerialPort): open /dev/ttyUSB2 sucess.@[fd is 27]
Thu Jan 1 00:01:18 1970,atCmdSet.c[187](sendAtCmdAndJudgeResponeBuf): Open tty sucessfull@/dev/ttyUSB2.
Thu Jan 1 00:01:18 1970,atCmdSet.c[72](setTermiosAttr): Function setTermiosAttr call.
Thu Jan 1 00:01:18 1970,atCmdSet.c[116](readSerialBuf): Function readSerialBuf call.
Thu Jan 1 00:01:18 1970,atCmdSet.c[194](sendAtCmdAndJudgeResponeBuf): Send AT Command
Thu Jan 1 00:01:18 1970,atCmdSet.c[100](writeSerialBuf): Function writeSerialBuf call.
Thu Jan 1 00:01:18 1970,atCmdSet.c[116](readSerialBuf): Function readSerialBuf call.
Thu Jan 1 00:01:19 1970,atCmdSet.c[244](parseResponseBuf): buffer is
+CSQ: 8,99

OK

^BOOT:39199034,0,0,0,89
,0,89

^MODE:0,0

^MODE:3,3

^RSSI:7
, nread = 47
Thu Jan 1 00:01:19 1970,atCmdSet.c[255](parseResponseBuf): buffer is
+CSQ: 8,99

OK

^BOOT:39199034,0,0,0,89

Thu Jan 1 00:01:19 1970,atCmdSet.c[272](parseResponseBuf): Respone data OK, buffer =
+CSQ: 8,99

OK

^BOOT:39199034,0,0,0,89

Thu Jan 1 00:01:19 1970,mobileInit.c[1076](mobileFormatCmd): dail cmd = pppd 3g 1 /dev/ttyUSB2 115200 connect "chat -s -v -f /etc/ppp/conn-script" disconnect "chat -s -v -f /etc/ppp/disconn-script" defaultroute noaccomp nopcomp lcp-echo-failure 20 lcp-echo-interval 60 httpd-pid 562 user_len 3 passwd_len 3 special-flag 100 mru 1480 mtu 1480 usepeerdns noipdefault ipcp-accept-local ipcp-accept-remote unit 0
Thu Jan 1 00:01:46 1970,mobileInit.c[227](mobileGenCfgFile): ISP=, APM = internet.mts.ru, dialNum = *99#, username = mts, password = mts
Thu Jan 1 00:01:46 1970,mobileInit.c[735](mobileFormatCmd): l_work_index = -1
Thu Jan 1 00:01:46 1970,mobileInit.c[746](mobileFormatCmd): ret = -1, l_index = 3
Thu Jan 1 00:01:46 1970,mobileInit.c[752](mobileFormatCmd): ret = -1, l_index = 3, interface = -1
Thu Jan 1 00:01:46 1970,mobileInit.c[760](mobileFormatCmd): disconnTimes = 1
Thu Jan 1 00:01:56 1970,mobileInit.c[227](mobileGenCfgFile): ISP=, APM = internet.mts.ru, dialNum = *99#, username = mts, password = mts
Thu Jan 1 00:01:56 1970,mobileInit.c[735](mobileFormatCmd): l_work_index = -1
Thu Jan 1 00:01:56 1970,mobileInit.c[746](mobileFormatCmd): ret = 0, l_index = 1
Thu Jan 1 00:01:56 1970,mobileInit.c[752](mobileFormatCmd): ret = 0, l_index = 1, interface = 0
Thu Jan 1 00:01:56 1970,atCmdSet.c[171](sendAtCmdAndJudgeResponeBuf): Function sendAtCmdAndJudgeResponeBuf call.
Thu Jan 1 00:01:56 1970,atCmdSet.c[34](openDevSerialPort): Function openDevSerialPort call.
Thu Jan 1 00:01:56 1970,atCmdSet.c[46](openDevSerialPort): open /dev/ttyUSB0 sucess.@[fd is 27]
Thu Jan 1 00:01:56 1970,atCmdSet.c[187](sendAtCmdAndJudgeResponeBuf): Open tty sucessfull@/dev/ttyUSB0.
Thu Jan 1 00:01:56 1970,atCmdSet.c[72](setTermiosAttr): Function setTermiosAttr call.
Thu Jan 1 00:01:56 1970,atCmdSet.c[116](readSerialBuf): Function readSerialBuf call.
Thu Jan 1 00:01:56 1970,atCmdSet.c[194](sendAtCmdAndJudgeResponeBuf): Send AT Command
Thu Jan 1 00:01:56 1970,atCmdSet.c[100](writeSerialBuf): Function writeSerialBuf call.
Thu Jan 1 00:01:56 1970,atCmdSet.c[116](readSerialBuf): Function readSerialBuf call.
Thu Jan 1 00:01:57 1970,atCmdSet.c[244](parseResponseBuf): buffer is
+CSQ: 8,99

OK
, nread = 20
Thu Jan 1 00:01:57 1970,atCmdSet.c[255](parseResponseBuf): buffer is
+CSQ: 8,99

OK

Thu Jan 1 00:01:57 1970,atCmdSet.c[272](parseResponseBuf): Respone data OK, buffer =
+CSQ: 8,99
Изображение

Не удается заставить работать связку TL-MR3020(2 экземпляра с разными прошивками - 111128 и 120615)+Huawei E1500+MTС/Мегафон(Смоленск) - Модем не устанавливает соединение. Однако если соединяться с компьютера, то сессия устанавливается на раз.
Модем находится в режиме "Только модем", включается как напрямую в роутер, так и через хаб с питанием.

Re: TL-MR3020+Huawei E1500+МТС/Мегафон

Добавлено: 03 авг 2012, 18:59
peter
Ну чтоже. С мартовской прошивкой 17 часов работает без сбоев.
Оч доволен.