TL-MR3020 + Huawei E3372(Мегафон М150-2, МТС 827F)

[loginza31559]

Аппаратная версия устройства: v1
Версия прошивки: 140610
Ваша страна: Россия
Название провайдера: Мегафон 4G LTE
Подключение с ПК по wifi или по кабелю?: WiFi
Если наблюдаются разрывы, то как часто?: Не наблюдаются
Наблюдается проблема, когда нет нагрузки?: нет
Что пишется в статусе Вашего подключения при проблеме?: Подключен
Наблюдается ли проблема при подключении без роутера?: Нет
Ваша операционная система: Mac OS
Антивирусные программы и фаерволы: нет
Добрый день!

Имею модем "Мегафон 150-2" (Huawei E3372) и роутер TP-LINK 3020.

При подключении модема напрямую в ноутбук входящая скорость интернета составляет порядка 35 Мбит, исходящая порядка 10Мбит.
При подключении модема в роутер и получении интернета на ноутбуке через WiFi входящая скорость составляет порядка 10Мбит, исходящая порядка 3Мбит.

Изначально модем тестировался со стандартной прошивкой (stick), затем перепрошил в hilink. При проведении повторных тестов результат не изменился.

Ради чистоты эксперимента те же самые действия были проделаны в связке: Huawei e3272 + tplink 3020.
Результат от этого лучше не стал.

В чем может быть проблема?

[Cenobit]

Сис. лог роутера сюда под спойлер скиньте после установления модемом соединения...

[ilka]

2016-01-01 04:00:15 [6] 3G: Hotplug: id[0]=12d1_14fe_0123456789ABCDEF, class[0]=unswitched_3g, action[0]=add
2016-01-01 04:00:15 [5] DHCPD: Recv REQUEST from 80:C1:6E:60:B2:4E
2016-01-01 04:00:15 [5] DHCPD: Send ACK to 192.168.1.101
2016-01-01 04:00:17 [6] 3G: 129: handle_card add card.
2016-01-01 04:00:18 [5] DHCPD: Recv INFORM from 80:C1:6E:60:B2:4E
2016-01-01 04:00:18 [6] 3G: 3G/4G Modem vendorID: 0x12d1; productID: 0x14fe
2016-01-01 04:00:19 [6] 3G: 238: This is a LTE modem which needs mode switch.
2016-01-01 04:00:19 [6] 3G: 287: can't switch usb device.
2016-01-01 04:00:23 [6] 3G: 400: go to already_switched.
2016-01-01 04:00:23 [6] 3G: 507: already_switched.
2016-01-01 04:00:24 [6] 3G: 525: After switch:cinfo.idVendor(12d1), cinfo.idProduct(1506).
2016-01-01 04:00:24 [6] 3G: 534 File: /var/3G/12d1_14fe_0
2016-01-01 04:00:24 [6] 3G: 538 Before judgeModemTypeByAfterSwitchID, isNeedSwitch = 1, targetPid = 0x1506
2016-01-01 04:00:24 [6] 3G: 562 After judgeModemTypeByAfterSwitchID, modemType = 1
2016-01-01 04:00:26 [6] 3G: 851: The modem name of the global parameter is QmiLte.
2016-01-01 04:00:27 [6] 3G: =>

2016-01-01 04:00:27 [6] 3G: =>T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0

2016-01-01 04:00:27 [6] 3G: =>D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1

2016-01-01 04:00:27 [6] 3G: =>P: Vendor=12d1 ProdID=1506 Rev= 1.02

2016-01-01 04:00:27 [6] 3G: =>S: Manufacturer=HUAWEI_MOBILE

2016-01-01 04:00:27 [6] 3G: =>S: Product=HUAWEI_MOBILE

2016-01-01 04:00:27 [6] 3G: =>C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr= 2mA

2016-01-01 04:00:27 [6] 3G: =>I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=usbserial_generic

2016-01-01 04:00:27 [6] 3G: =>E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2016-01-01 04:00:27 [6] 3G: =>E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2016-01-01 04:00:27 [6] 3G: =>I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=usbserial_generic

2016-01-01 04:00:27 [6] 3G: =>E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms

2016-01-01 04:00:27 [6] 3G: =>E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2016-01-01 04:00:27 [6] 3G: =>E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2016-01-01 04:00:27 [6] 3G: =>I: If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm

2016-01-01 04:00:27 [6] 3G: =>E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=2ms

2016-01-01 04:00:27 [6] 3G: =>I:* If#= 2 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm

2016-01-01 04:00:27 [6] 3G: =>E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=2ms

2016-01-01 04:00:27 [6] 3G: =>E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2016-01-01 04:00:27 [6] 3G: =>E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2016-01-01 04:00:27 [6] 3G: =>I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

2016-01-01 04:00:27 [6] 3G: =>E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2016-01-01 04:00:27 [6] 3G: =>E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

2016-01-01 04:00:27 [6] 3G: =>I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

2016-01-01 04:00:27 [6] 3G: =>E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2016-01-01 04:00:27 [6] 3G: =>E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

2016-01-01 04:00:28 [6] 3G: Main interface_index[0] = 0
2016-01-01 04:00:28 [6] 3G: 925: The interfaceNum is 1, the indexInterface is 0!
2016-01-01 04:00:28 [5] DHCPD: Recv REQUEST from 9C:B7:0D:F1:E1:D0
2016-01-01 04:00:29 [5] DHCPD: Send ACK to 192.168.1.100
2016-01-01 04:00:29 [6] 3G: Line:1130 cmd: modem_scan -d /dev/ttyUSB0 -f "/usr/bin/chat -S -V -f /var/3G/script" > /var/3G/modem_info 2>&1 &
2016-01-01 04:00:30 [6] 3G: Line 1168: ATZ
2016-01-01 04:00:30 [6] 3G: Line 1168: OK
2016-01-01 04:00:30 [6] 3G: Line 1168: AT+CGMM
2016-01-01 04:00:30 [6] 3G: get_modem_info_file 107 getModemParamByScript return valid type = 1
2016-01-01 04:00:30 [6] 3G: Line:1130 cmd: modem_scan -d /dev/ttyUSB0 -f "/usr/bin/chat -S -V -f /var/3G/script" > /var/3G/modem_info 2>&1 &
2016-01-01 04:00:31 [6] 3G: Line 1168: ATZ
2016-01-01 04:00:31 [6] 3G: Line 1168: OK
2016-01-01 04:00:31 [6] 3G: Line 1168: AT+CSQ
2016-01-01 04:00:31 [6] 3G: Line 1168:
2016-01-01 04:00:31 [6] 3G: Line 1168: OK
2016-01-01 04:00:31 [6] 3G: Line 1168: AT+CSQ
2016-01-01 04:00:31 [6] 3G: Line 1168:
2016-01-01 04:00:31 [6] 3G: Line 1168: OK

2016-01-01 04:00:31 [6] 3G: Line 1168: Serial connection established.
2016-01-01 04:00:31 [6] 3G: Line 1168: Serial link disconnected.
2016-01-01 04:00:31 [6] 3G: get_modem_info_file 124 getModemParamByScript return valid type = 1
2016-01-01 04:00:31 [6] 3G: Line:1130 cmd: modem_scan -d /dev/ttyUSB0 -f "/usr/bin/chat -S -V -f /var/3G/script" > /var/3G/modem_info 2>&1 &
2016-01-01 04:00:31 [5] DHCPD: Recv INFORM from 9C:B7:0D:F1:E1:D0
2016-01-01 04:00:32 [6] 3G: Line 1168: ATZ
2016-01-01 04:00:32 [6] 3G: Line 1168: OK
2016-01-01 04:00:32 [6] 3G: Line 1168: AT+CPIN?
2016-01-01 04:00:32 [6] 3G: Line 1168:
2016-01-01 04:00:32 [6] 3G: Line 1168: OK
2016-01-01 04:00:32 [6] 3G: Line 1168: AT+CPIN?
2016-01-01 04:00:32 [6] 3G: Line 1168:
2016-01-01 04:00:32 [6] 3G: Line 1168: OK

2016-01-01 04:00:32 [6] 3G: Line 1168: Serial connection established.
2016-01-01 04:00:32 [6] 3G: Line 1168: Serial link disconnected.
2016-01-01 04:00:32 [6] 3G: get_modem_info_file 140 getModemParamByScript return valid type = 1
2016-01-01 04:00:32 [6] 3G: get_modem_info_file 156 Return chip type = 1
2016-01-01 04:00:32 [6] 3G: 961: After get_modem_info_file modemName = E3372, deviceName = ttyUSB0, simLock = 16, modemChipType = 1
2016-01-01 04:00:32 [6] 3G: 980: modemName = E3372, deviceName = ttyUSB0, simLock = 16, modemChipType = 1
2016-01-01 04:00:44 [6] 3G: oal_3g_getIspIdxFromSimCard 1185: mcc is 250, mnc is 993
2016-01-01 04:00:47 [5] DHCPC: Send DISCOVER with request ip 0.0.0.0 and unicast flag 0
2016-01-01 04:00:47 [5] DHCPC: Recv OFFER from server 100.78.14.241 with ip 100.78.14.248
2016-01-01 04:00:47 [5] DHCPC: Send REQUEST to server 100.78.14.241 with request ip 100.78.14.248
2016-01-01 04:00:48 [5] DHCPC: Recv ACK from server 100.78.14.241 with ip 100.78.14.248 lease time 518400
2016-01-01 04:01:20 [5] DHCPD: Recv INFORM from 80:C1:6E:60:B2:4E
2018-04-16 08:30:24 [6] 3G: Hotplug: id[0]=12d1_1506, class[0]=switched_3g, action[0]=remove
2018-04-16 08:30:26 [6] DHCPC: Unicasting a release of 100.78.14.248 to 100.78.14.241
2018-04-16 08:30:26 [6] 3G: 3G/4G modem is plugged out.
2018-04-16 08:33:15 [6] 3G: Hotplug: id[0]=12d1_1506, class[0]=switched_3g, action[0]=add
2018-04-16 08:33:17 [6] 3G: 129: handle_card add card.
2018-04-16 08:33:18 [6] 3G: 3G/4G Modem vendorID: 0x12d1; productID: 0x1506
2018-04-16 08:33:19 [6] 3G: 282: go to already_switched.
2018-04-16 08:33:19 [6] 3G: 507: already_switched.
2018-04-16 08:33:20 [6] 3G: 525: After switch:cinfo.idVendor(12d1), cinfo.idProduct(1506).
2018-04-16 08:33:20 [6] 3G: 534 File:
2018-04-16 08:33:20 [6] 3G: 538 Before judgeModemTypeByAfterSwitchID, isNeedSwitch = 1, targetPid = 0x1506
2018-04-16 08:33:20 [6] 3G: 562 After judgeModemTypeByAfterSwitchID, modemType = 1
2018-04-16 08:33:22 [6] 3G: 851: The modem name of the global parameter is QmiLte.
2018-04-16 08:33:23 [6] 3G: =>

2018-04-16 08:33:23 [6] 3G: =>T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0

2018-04-16 08:33:23 [6] 3G: =>D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1

2018-04-16 08:33:23 [6] 3G: =>P: Vendor=12d1 ProdID=1506 Rev= 1.02

2018-04-16 08:33:23 [6] 3G: =>S: Manufacturer=HUAWEI_MOBILE

2018-04-16 08:33:23 [6] 3G: =>S: Product=HUAWEI_MOBILE

2018-04-16 08:33:23 [6] 3G: =>C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr= 2mA

2018-04-16 08:33:23 [6] 3G: =>I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=03 Prot=10 Driver=usbserial_generic

2018-04-16 08:33:23 [6] 3G: =>E: Ad=82(I) Atr=03(Int.) MxPS= 10 Ivl=32ms

2018-04-16 08:33:23 [6] 3G: =>E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2018-04-16 08:33:23 [6] 3G: =>E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2018-04-16 08:33:23 [6] 3G: =>I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=03 Prot=12 Driver=usbserial_generic

2018-04-16 08:33:23 [6] 3G: =>E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2018-04-16 08:33:23 [6] 3G: =>E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2018-04-16 08:33:23 [6] 3G: =>I: If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=03 Prot=16 Driver=huawei_cdc_ncm

2018-04-16 08:33:23 [6] 3G: =>E: Ad=85(I) Atr=03(Int.) MxPS= 16 Ivl=2ms

2018-04-16 08:33:23 [6] 3G: =>I:* If#= 2 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=03 Prot=16 Driver=huawei_cdc_ncm

2018-04-16 08:33:23 [6] 3G: =>E: Ad=85(I) Atr=03(Int.) MxPS= 16 Ivl=2ms

2018-04-16 08:33:23 [6] 3G: =>E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2018-04-16 08:33:23 [6] 3G: =>E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2018-04-16 08:33:24 [6] 3G: Main interface_index[0] = 0
2018-04-16 08:33:24 [6] 3G: Vice interface_index[1] = 1
2018-04-16 08:33:24 [6] 3G: 925: The interfaceNum is 2, the indexInterface is 0!
2018-04-16 08:33:25 [6] 3G: Line:1130 cmd: modem_scan -d /dev/ttyUSB0 -f "/usr/bin/chat -S -V -f /var/3G/script" > /var/3G/modem_info 2>&1 &
2018-04-16 08:33:26 [6] 3G: Line 1168: ATZ
2018-04-16 08:33:26 [6] 3G: Line 1168: OK
2018-04-16 08:33:26 [6] 3G: Line 1168: AT+CGMM
2018-04-16 08:33:26 [6] 3G: get_modem_info_file 107 getModemParamByScript return valid type = 1
2018-04-16 08:33:26 [6] 3G: Line:1130 cmd: modem_scan -d /dev/ttyUSB0 -f "/usr/bin/chat -S -V -f /var/3G/script" > /var/3G/modem_info 2>&1 &
2018-04-16 08:33:26 [5] DHCPD: Recv REQUEST from 9C:B7:0D:F1:E1:D0
2018-04-16 08:33:26 [5] DHCPD: Send ACK to 192.168.1.100
2018-04-16 08:33:27 [6] 3G: Line 1168: ATZ
2018-04-16 08:33:27 [6] 3G: Line 1168: OK
2018-04-16 08:33:27 [6] 3G: Line 1168: AT+CSQ
2018-04-16 08:33:27 [6] 3G: Line 1168:
2018-04-16 08:33:27 [6] 3G: Line 1168: OK
2018-04-16 08:33:27 [6] 3G: Line 1168: AT+CSQ
2018-04-16 08:33:27 [6] 3G: Line 1168:
2018-04-16 08:33:27 [6] 3G: Line 1168: OK

2018-04-16 08:33:27 [6] 3G: Line 1168: Serial connection established.
2018-04-16 08:33:27 [6] 3G: Line 1168: Serial link disconnected.
2018-04-16 08:33:27 [6] 3G: get_modem_info_file 124 getModemParamByScript return valid type = 1
2018-04-16 08:33:27 [6] 3G: Line:1130 cmd: modem_scan -d /dev/ttyUSB0 -f "/usr/bin/chat -S -V -f /var/3G/script" > /var/3G/modem_info 2>&1 &
2018-04-16 08:33:29 [6] 3G: Line 1168: ATZ
2018-04-16 08:33:29 [6] 3G: Line 1168: OK
2018-04-16 08:33:29 [6] 3G: Line 1168: AT+CPIN?
2018-04-16 08:33:29 [6] 3G: Line 1168:
2018-04-16 08:33:29 [6] 3G: Line 1168: OK
2018-04-16 08:33:29 [6] 3G: Line 1168: AT+CPIN?
2018-04-16 08:33:29 [6] 3G: Line 1168:
2018-04-16 08:33:29 [6] 3G: Line 1168: OK

2018-04-16 08:33:29 [6] 3G: Line 1168: Serial connection established.
2018-04-16 08:33:29 [6] 3G: Line 1168: Serial link disconnected.
2018-04-16 08:33:29 [6] 3G: get_modem_info_file 140 getModemParamByScript return valid type = 1
2018-04-16 08:33:29 [6] 3G: get_modem_info_file 156 Return chip type = 1
2018-04-16 08:33:29 [6] 3G: 961: After get_modem_info_file modemName = E3372, deviceName = ttyUSB0, simLock = 16, modemChipType = 1
2018-04-16 08:33:29 [6] 3G: 980: modemName = E3372, deviceName = ttyUSB0, simLock = 16, modemChipType = 1
2018-04-16 08:33:30 [5] DHCPD: Recv REQUEST from 9C:B7:0D:F1:E1:D0
2018-04-16 08:33:30 [5] DHCPD: Send ACK to 192.168.1.100
2018-04-16 08:33:33 [5] DHCPD: Recv DISCOVER from 9C:B7:0D:F1:E1:D0
2018-04-16 08:33:33 [5] DHCPD: Send OFFER with ip 192.168.1.100
2018-04-16 08:33:33 [5] DHCPD: Recv DISCOVER from 9C:B7:0D:F1:E1:D0
2018-04-16 08:33:33 [5] DHCPD: Send OFFER with ip 192.168.1.100
2018-04-16 08:33:34 [5] DHCPD: Recv INFORM from 9C:B7:0D:F1:E1:D0
2018-04-16 08:33:41 [6] 3G: oal_3g_getIspIdxFromSimCard 1185: mcc is 250, mnc is 993
2018-04-16 08:33:46 [5] DHCPC: Send REQUEST to server 0.0.0.0 with request ip 100.78.14.248
2018-04-16 08:33:46 [5] DHCPC: Recv NAK from server 100.66.207.121 with ip 100.78.14.248
2018-04-16 08:33:50 [5] DHCPC: Send DISCOVER with request ip 0.0.0.0 and unicast flag 0
2018-04-16 08:33:50 [5] DHCPC: Recv OFFER from server 100.66.207.121 with ip 100.66.207.122
2018-04-16 08:33:51 [5] DHCPC: Send REQUEST to server 100.66.207.121 with request ip 100.66.207.122
2018-04-16 08:33:52 [5] DHCPC: Recv ACK from server 100.66.207.121 with ip 100.66.207.122 lease time 518400

[Cenobit]

2016-01-01 04:00:15 [6] 3G: Hotplug: id[0]=12d1_14fe_0123456789ABCDEF, class[0]=unswitched_3g, action[0]=add
2016-01-01 04:00:15 [5] DHCPD: Recv REQUEST from 80:C1:6E:60:B2:4E
2016-01-01 04:00:15 [5] DHCPD: Send ACK to 192.168.1.101
2016-01-01 04:00:17 [6] 3G: 129: handle_card add card.
2016-01-01 04:00:18 [5] DHCPD: Recv INFORM from 80:C1:6E:60:B2:4E
2016-01-01 04:00:18 [6] 3G: 3G/4G Modem vendorID: 0x12d1; productID: 0x14fe
2016-01-01 04:00:19 [6] 3G: 238: This is a LTE modem which needs mode switch.
2016-01-01 04:00:19 [6] 3G: 287: can't switch usb device.
2016-01-01 04:00:23 [6] 3G: 400: go to already_switched.
2016-01-01 04:00:23 [6] 3G: 507: already_switched.
2016-01-01 04:00:24 [6] 3G: 525: After switch:cinfo.idVendor(12d1), cinfo.idProduct(1506).
2016-01-01 04:00:24 [6] 3G: 534 File: /var/3G/12d1_14fe_0
2016-01-01 04:00:24 [6] 3G: 538 Before judgeModemTypeByAfterSwitchID, isNeedSwitch = 1, targetPid = 0x1506
2016-01-01 04:00:24 [6] 3G: 562 After judgeModemTypeByAfterSwitchID, modemType = 1
2016-01-01 04:00:26 [6] 3G: 851: The modem name of the global parameter is QmiLte.
2016-01-01 04:00:27 [6] 3G: =>

2016-01-01 04:00:27 [6] 3G: =>T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0

2016-01-01 04:00:27 [6] 3G: =>D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1

2016-01-01 04:00:27 [6] 3G: =>P: Vendor=12d1 ProdID=1506 Rev= 1.02

2016-01-01 04:00:27 [6] 3G: =>S: Manufacturer=HUAWEI_MOBILE

2016-01-01 04:00:27 [6] 3G: =>S: Product=HUAWEI_MOBILE

2016-01-01 04:00:27 [6] 3G: =>C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr= 2mA

2016-01-01 04:00:27 [6] 3G: =>I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=usbserial_generic

2016-01-01 04:00:27 [6] 3G: =>E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2016-01-01 04:00:27 [6] 3G: =>E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2016-01-01 04:00:27 [6] 3G: =>I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=usbserial_generic

2016-01-01 04:00:27 [6] 3G: =>E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms

2016-01-01 04:00:27 [6] 3G: =>E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2016-01-01 04:00:27 [6] 3G: =>E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2016-01-01 04:00:27 [6] 3G: =>I: If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm

2016-01-01 04:00:27 [6] 3G: =>E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=2ms

2016-01-01 04:00:27 [6] 3G: =>I:* If#= 2 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm

2016-01-01 04:00:27 [6] 3G: =>E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=2ms

2016-01-01 04:00:27 [6] 3G: =>E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2016-01-01 04:00:27 [6] 3G: =>E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2016-01-01 04:00:27 [6] 3G: =>I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

2016-01-01 04:00:27 [6] 3G: =>E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2016-01-01 04:00:27 [6] 3G: =>E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

2016-01-01 04:00:27 [6] 3G: =>I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

2016-01-01 04:00:27 [6] 3G: =>E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2016-01-01 04:00:27 [6] 3G: =>E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

2016-01-01 04:00:28 [6] 3G: Main interface_index[0] = 0
2016-01-01 04:00:28 [6] 3G: 925: The interfaceNum is 1, the indexInterface is 0!
2016-01-01 04:00:28 [5] DHCPD: Recv REQUEST from 9C:B7:0D:F1:E1:D0
2016-01-01 04:00:29 [5] DHCPD: Send ACK to 192.168.1.100
2016-01-01 04:00:29 [6] 3G: Line:1130 cmd: modem_scan -d /dev/ttyUSB0 -f "/usr/bin/chat -S -V -f /var/3G/script" > /var/3G/modem_info 2>&1 &
2016-01-01 04:00:30 [6] 3G: Line 1168: ATZ
2016-01-01 04:00:30 [6] 3G: Line 1168: OK
2016-01-01 04:00:30 [6] 3G: Line 1168: AT+CGMM
2016-01-01 04:00:30 [6] 3G: get_modem_info_file 107 getModemParamByScript return valid type = 1
2016-01-01 04:00:30 [6] 3G: Line:1130 cmd: modem_scan -d /dev/ttyUSB0 -f "/usr/bin/chat -S -V -f /var/3G/script" > /var/3G/modem_info 2>&1 &
2016-01-01 04:00:31 [6] 3G: Line 1168: ATZ
2016-01-01 04:00:31 [6] 3G: Line 1168: OK
2016-01-01 04:00:31 [6] 3G: Line 1168: AT+CSQ
2016-01-01 04:00:31 [6] 3G: Line 1168:
2016-01-01 04:00:31 [6] 3G: Line 1168: OK
2016-01-01 04:00:31 [6] 3G: Line 1168: AT+CSQ
2016-01-01 04:00:31 [6] 3G: Line 1168:
2016-01-01 04:00:31 [6] 3G: Line 1168: OK

2016-01-01 04:00:31 [6] 3G: Line 1168: Serial connection established.
2016-01-01 04:00:31 [6] 3G: Line 1168: Serial link disconnected.
2016-01-01 04:00:31 [6] 3G: get_modem_info_file 124 getModemParamByScript return valid type = 1
2016-01-01 04:00:31 [6] 3G: Line:1130 cmd: modem_scan -d /dev/ttyUSB0 -f "/usr/bin/chat -S -V -f /var/3G/script" > /var/3G/modem_info 2>&1 &
2016-01-01 04:00:31 [5] DHCPD: Recv INFORM from 9C:B7:0D:F1:E1:D0
2016-01-01 04:00:32 [6] 3G: Line 1168: ATZ
2016-01-01 04:00:32 [6] 3G: Line 1168: OK
2016-01-01 04:00:32 [6] 3G: Line 1168: AT+CPIN?
2016-01-01 04:00:32 [6] 3G: Line 1168:
2016-01-01 04:00:32 [6] 3G: Line 1168: OK
2016-01-01 04:00:32 [6] 3G: Line 1168: AT+CPIN?
2016-01-01 04:00:32 [6] 3G: Line 1168:
2016-01-01 04:00:32 [6] 3G: Line 1168: OK

2016-01-01 04:00:32 [6] 3G: Line 1168: Serial connection established.
2016-01-01 04:00:32 [6] 3G: Line 1168: Serial link disconnected.
2016-01-01 04:00:32 [6] 3G: get_modem_info_file 140 getModemParamByScript return valid type = 1
2016-01-01 04:00:32 [6] 3G: get_modem_info_file 156 Return chip type = 1
2016-01-01 04:00:32 [6] 3G: 961: After get_modem_info_file modemName = E3372, deviceName = ttyUSB0, simLock = 16, modemChipType = 1
2016-01-01 04:00:32 [6] 3G: 980: modemName = E3372, deviceName = ttyUSB0, simLock = 16, modemChipType = 1
2016-01-01 04:00:44 [6] 3G: oal_3g_getIspIdxFromSimCard 1185: mcc is 250, mnc is 993
2016-01-01 04:00:47 [5] DHCPC: Send DISCOVER with request ip 0.0.0.0 and unicast flag 0
2016-01-01 04:00:47 [5] DHCPC: Recv OFFER from server 100.78.14.241 with ip 100.78.14.248
2016-01-01 04:00:47 [5] DHCPC: Send REQUEST to server 100.78.14.241 with request ip 100.78.14.248
2016-01-01 04:00:48 [5] DHCPC: Recv ACK from server 100.78.14.241 with ip 100.78.14.248 lease time 518400
2016-01-01 04:01:20 [5] DHCPD: Recv INFORM from 80:C1:6E:60:B2:4E
2018-04-16 08:30:24 [6] 3G: Hotplug: id[0]=12d1_1506, class[0]=switched_3g, action[0]=remove
2018-04-16 08:30:26 [6] DHCPC: Unicasting a release of 100.78.14.248 to 100.78.14.241
2018-04-16 08:30:26 [6] 3G: 3G/4G modem is plugged out.
2018-04-16 08:33:15 [6] 3G: Hotplug: id[0]=12d1_1506, class[0]=switched_3g, action[0]=add
2018-04-16 08:33:17 [6] 3G: 129: handle_card add card.
2018-04-16 08:33:18 [6] 3G: 3G/4G Modem vendorID: 0x12d1; productID: 0x1506
2018-04-16 08:33:19 [6] 3G: 282: go to already_switched.
2018-04-16 08:33:19 [6] 3G: 507: already_switched.
2018-04-16 08:33:20 [6] 3G: 525: After switch:cinfo.idVendor(12d1), cinfo.idProduct(1506).
2018-04-16 08:33:20 [6] 3G: 534 File:
2018-04-16 08:33:20 [6] 3G: 538 Before judgeModemTypeByAfterSwitchID, isNeedSwitch = 1, targetPid = 0x1506
2018-04-16 08:33:20 [6] 3G: 562 After judgeModemTypeByAfterSwitchID, modemType = 1
2018-04-16 08:33:22 [6] 3G: 851: The modem name of the global parameter is QmiLte.
2018-04-16 08:33:23 [6] 3G: =>

2018-04-16 08:33:23 [6] 3G: =>T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0

2018-04-16 08:33:23 [6] 3G: =>D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1

2018-04-16 08:33:23 [6] 3G: =>P: Vendor=12d1 ProdID=1506 Rev= 1.02

2018-04-16 08:33:23 [6] 3G: =>S: Manufacturer=HUAWEI_MOBILE

2018-04-16 08:33:23 [6] 3G: =>S: Product=HUAWEI_MOBILE

2018-04-16 08:33:23 [6] 3G: =>C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr= 2mA

2018-04-16 08:33:23 [6] 3G: =>I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=03 Prot=10 Driver=usbserial_generic

2018-04-16 08:33:23 [6] 3G: =>E: Ad=82(I) Atr=03(Int.) MxPS= 10 Ivl=32ms

2018-04-16 08:33:23 [6] 3G: =>E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2018-04-16 08:33:23 [6] 3G: =>E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2018-04-16 08:33:23 [6] 3G: =>I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=03 Prot=12 Driver=usbserial_generic

2018-04-16 08:33:23 [6] 3G: =>E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2018-04-16 08:33:23 [6] 3G: =>E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2018-04-16 08:33:23 [6] 3G: =>I: If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=03 Prot=16 Driver=huawei_cdc_ncm

2018-04-16 08:33:23 [6] 3G: =>E: Ad=85(I) Atr=03(Int.) MxPS= 16 Ivl=2ms

2018-04-16 08:33:23 [6] 3G: =>I:* If#= 2 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=03 Prot=16 Driver=huawei_cdc_ncm

2018-04-16 08:33:23 [6] 3G: =>E: Ad=85(I) Atr=03(Int.) MxPS= 16 Ivl=2ms

2018-04-16 08:33:23 [6] 3G: =>E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2018-04-16 08:33:23 [6] 3G: =>E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

2018-04-16 08:33:24 [6] 3G: Main interface_index[0] = 0
2018-04-16 08:33:24 [6] 3G: Vice interface_index[1] = 1
2018-04-16 08:33:24 [6] 3G: 925: The interfaceNum is 2, the indexInterface is 0!
2018-04-16 08:33:25 [6] 3G: Line:1130 cmd: modem_scan -d /dev/ttyUSB0 -f "/usr/bin/chat -S -V -f /var/3G/script" > /var/3G/modem_info 2>&1 &
2018-04-16 08:33:26 [6] 3G: Line 1168: ATZ
2018-04-16 08:33:26 [6] 3G: Line 1168: OK
2018-04-16 08:33:26 [6] 3G: Line 1168: AT+CGMM
2018-04-16 08:33:26 [6] 3G: get_modem_info_file 107 getModemParamByScript return valid type = 1
2018-04-16 08:33:26 [6] 3G: Line:1130 cmd: modem_scan -d /dev/ttyUSB0 -f "/usr/bin/chat -S -V -f /var/3G/script" > /var/3G/modem_info 2>&1 &
2018-04-16 08:33:26 [5] DHCPD: Recv REQUEST from 9C:B7:0D:F1:E1:D0
2018-04-16 08:33:26 [5] DHCPD: Send ACK to 192.168.1.100
2018-04-16 08:33:27 [6] 3G: Line 1168: ATZ
2018-04-16 08:33:27 [6] 3G: Line 1168: OK
2018-04-16 08:33:27 [6] 3G: Line 1168: AT+CSQ
2018-04-16 08:33:27 [6] 3G: Line 1168:
2018-04-16 08:33:27 [6] 3G: Line 1168: OK
2018-04-16 08:33:27 [6] 3G: Line 1168: AT+CSQ
2018-04-16 08:33:27 [6] 3G: Line 1168:
2018-04-16 08:33:27 [6] 3G: Line 1168: OK

2018-04-16 08:33:27 [6] 3G: Line 1168: Serial connection established.
2018-04-16 08:33:27 [6] 3G: Line 1168: Serial link disconnected.
2018-04-16 08:33:27 [6] 3G: get_modem_info_file 124 getModemParamByScript return valid type = 1
2018-04-16 08:33:27 [6] 3G: Line:1130 cmd: modem_scan -d /dev/ttyUSB0 -f "/usr/bin/chat -S -V -f /var/3G/script" > /var/3G/modem_info 2>&1 &
2018-04-16 08:33:29 [6] 3G: Line 1168: ATZ
2018-04-16 08:33:29 [6] 3G: Line 1168: OK
2018-04-16 08:33:29 [6] 3G: Line 1168: AT+CPIN?
2018-04-16 08:33:29 [6] 3G: Line 1168:
2018-04-16 08:33:29 [6] 3G: Line 1168: OK
2018-04-16 08:33:29 [6] 3G: Line 1168: AT+CPIN?
2018-04-16 08:33:29 [6] 3G: Line 1168:
2018-04-16 08:33:29 [6] 3G: Line 1168: OK

2018-04-16 08:33:29 [6] 3G: Line 1168: Serial connection established.
2018-04-16 08:33:29 [6] 3G: Line 1168: Serial link disconnected.
2018-04-16 08:33:29 [6] 3G: get_modem_info_file 140 getModemParamByScript return valid type = 1
2018-04-16 08:33:29 [6] 3G: get_modem_info_file 156 Return chip type = 1
2018-04-16 08:33:29 [6] 3G: 961: After get_modem_info_file modemName = E3372, deviceName = ttyUSB0, simLock = 16, modemChipType = 1
2018-04-16 08:33:29 [6] 3G: 980: modemName = E3372, deviceName = ttyUSB0, simLock = 16, modemChipType = 1
2018-04-16 08:33:30 [5] DHCPD: Recv REQUEST from 9C:B7:0D:F1:E1:D0
2018-04-16 08:33:30 [5] DHCPD: Send ACK to 192.168.1.100
2018-04-16 08:33:33 [5] DHCPD: Recv DISCOVER from 9C:B7:0D:F1:E1:D0
2018-04-16 08:33:33 [5] DHCPD: Send OFFER with ip 192.168.1.100
2018-04-16 08:33:33 [5] DHCPD: Recv DISCOVER from 9C:B7:0D:F1:E1:D0
2018-04-16 08:33:33 [5] DHCPD: Send OFFER with ip 192.168.1.100
2018-04-16 08:33:34 [5] DHCPD: Recv INFORM from 9C:B7:0D:F1:E1:D0
2018-04-16 08:33:41 [6] 3G: oal_3g_getIspIdxFromSimCard 1185: mcc is 250, mnc is 993
2018-04-16 08:33:46 [5] DHCPC: Send REQUEST to server 0.0.0.0 with request ip 100.78.14.248
2018-04-16 08:33:46 [5] DHCPC: Recv NAK from server 100.66.207.121 with ip 100.78.14.248
2018-04-16 08:33:50 [5] DHCPC: Send DISCOVER with request ip 0.0.0.0 and unicast flag 0
2018-04-16 08:33:50 [5] DHCPC: Recv OFFER from server 100.66.207.121 with ip 100.66.207.122
2018-04-16 08:33:51 [5] DHCPC: Send REQUEST to server 100.66.207.121 with request ip 100.66.207.122
2018-04-16 08:33:52 [5] DHCPC: Recv ACK from server 100.66.207.121 with ip 100.66.207.122 lease time 518400

Менять композицию свистка по рекомендациям пробовали?

[ilka]

Благодарю, заработало с прошивкой для Австралии, v3.2 плюс поменял композицию на:
AT^SETPORT= "ff;10,12,16,a2"
в программе DC unlocker 2.
Но скорость очень низкая 926.10 Кбит/с=115.76 КБайт/с

[ilka]

Сори скорость поднялась

[Cenobit]

заработало с прошивкой для Австралии

v.3.20 ?

Но скорость очень низкая

Если нужна максимальная скорость, то вариант один — HiLink прошивка в свисток...

[maksim.korotkov]

где взять прошивку для австралии версии 3.2? на оф сайте только версия 3, она одна для всех eu

[Maria2017]

где взять прошивку для австралии версии 3.2? на оф сайте только версия 3, она одна для всех eu

Да, она одна для всех 3 версий.

[maksim.korotkov]

я разобрался. Имеется в виду ДЛЯ ВЕРСИИ 3.2. Нашел, прошил. Хуавей 3372 все одно не работает, хотя написано, что идентифицирован успешно, инета нет, хотя лампочка на модеме горит. Видимо они допилили для 3372h а у меня 3372s. Вообще очень разочарован тплинком, больше никогда не возьму этого производителя и никому не порекомндую - кривизна чертова! Все худо-бедно работает с малазийской прошивкой PULPSTONE, но на ней не пускает в ВПН, да и стабильность очень плохая (раз 10 в день перегружать приходится).

[Maria2017]

В списке совместимости указана модель модема E3372h. Соответственно, возможно, из-за этого модель E3372s работает некорректно.Возможна какая-то частичная несовместимость. Попробуйте войти в утилиту модема,подключив его в ПК, проверить уровень сигнала в dBm.