Archer C50 @ Chaos Calmer 15.05 + ZTE MF710M

Перед загрузкой данных файлов, ознакомьтесь с правилами раздела
Правила форума
Внимание!
Данные прошивки НЕ являются официальными, поэтому мы не можем гарантировать стабильную работу вашего устройства.
Установка сторонней прошивки может стать причиной снятия вашего устройства с гарантии.
Устанавливая данные версии прошивок, вы действуете на свой страх и риск


Правила форума TP-LINK lll ЧАВО lll Первичная настройка WAN роутера lll Настройка под провайдеров lll Официальные прошивки и драйверы
Cenobit
Лучший пользователь 2013-2017
Лучший пользователь 2013-2017
Сообщения: 2737
Зарегистрирован: 24 июн 2013, 05:57
Страна: Россия

Re: Archer C50 @ Chaos Calmer 15.05 + ZTE MF710M

Сообщение Cenobit » 09 июл 2017, 12:16

WhatAmIdoingHere писал(а):Свисток воткнул, роутер перезагрузил. Интерфейсов не появилось
Интерфейc WAN -> Edit -> Physical Settings

TL-MR3220 v2 + Huawei E3372, ZTE MF823

vovan26
OpenWrt разработчик
OpenWrt разработчик
Сообщения: 2493
Зарегистрирован: 12 мар 2014, 17:20
Страна: Узбкистан
Откуда: Узбекистан

Re: Archer C50 @ Chaos Calmer 15.05 + ZTE MF710M

Сообщение vovan26 » 09 июл 2017, 12:29

Сислог выложи.
Разработка ПО для роутеров на базе OpenWrt.
Желание получить ответ, предполагает умение сформулировать вопрос. (И.В. Сталин)
На общие вопросы в личке не отвечаю, задайте его на форуме.

vovan26
OpenWrt разработчик
OpenWrt разработчик
Сообщения: 2493
Зарегистрирован: 12 мар 2014, 17:20
Страна: Узбкистан
Откуда: Узбекистан

Re: Archer C50 @ Chaos Calmer 15.05 + ZTE MF710M

Сообщение vovan26 » 09 июл 2017, 12:33

Cenobit писал(а):
vovan26 писал(а): Смотреть надо в Putty - ls /dev, или в сислоге.
А зачем так сложно? :lol:
Если пакеты встали "ровно" и usb-modeswitch "отработал" как положено, то и в морде зверька всё видно будет... :mrgreen:
Какая морда свистка если его в девайсах нету?
Разработка ПО для роутеров на базе OpenWrt.
Желание получить ответ, предполагает умение сформулировать вопрос. (И.В. Сталин)
На общие вопросы в личке не отвечаю, задайте его на форуме.

WhatAmIdoingHere
Сообщения: 38
Зарегистрирован: 08 июл 2017, 10:36
Страна: Россия

Re: Archer C50 @ Chaos Calmer 15.05 + ZTE MF710M

Сообщение WhatAmIdoingHere » 09 июл 2017, 12:36

WAN
https://yadi.sk/i/FZQPbn2t3KsuAE

WAN6
https://yadi.sk/i/tExgSZIq3KsuEm

Системный журнал

Код: Выделить всё

Sun Jul  9 09:43:42 2017 kern.notice kernel: [    0.000000] Linux version 4.4.61 (buildbot@builds-02.infra.lede-project.org) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3103-1b51a49) ) #0 Sat Apr 15 16:13:45 2017
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] Board has DDR2
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] Analog PMU set to hw control
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] Digital PMU set to hw control
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] MIPS: machine is TP-Link Archer C50
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] Determined physical RAM map:
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000]  memory: 04000000 @ 00000000 (usable)
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] Zone ranges:
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] Movable zone start for each node
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] Early memory node ranges
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
Sun Jul  9 09:43:42 2017 kern.debug kernel: [    0.000000] On node 0 totalpages: 16384
Sun Jul  9 09:43:42 2017 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 8035a4b0, node_mem_map 81000000
Sun Jul  9 09:43:42 2017 kern.debug kernel: [    0.000000]   Normal zone: 128 pages used for memmap
Sun Jul  9 09:43:42 2017 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Sun Jul  9 09:43:42 2017 kern.debug kernel: [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
Sun Jul  9 09:43:42 2017 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Sun Jul  9 09:43:42 2017 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Sun Jul  9 09:43:42 2017 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Sun Jul  9 09:43:42 2017 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] Writing ErrCtl register=0007cab0
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] Readback ErrCtl register=0007cab0
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] Memory: 60944K/65536K available (3013K kernel code, 143K rwdata, 384K rodata, 164K init, 208K bss, 4592K reserved, 0K cma-reserved)
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] NR_IRQS:256
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] CPU Clock: 580MHz
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] systick: enable autosleep mode
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] systick: running - mult: 214748, shift: 32
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.007578] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.070077] pid_max: default: 32768 minimum: 301
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.074701] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.081070] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.094732] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.104276] futex hash table entries: 256 (order: -1, 3072 bytes)
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.110233] pinctrl core: initialized pinctrl subsystem
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.116543] NET: Registered protocol family 16
Sun Jul  9 09:43:42 2017 kern.warn kernel: [    0.126362] Can't analyze schedule() prologue at 8000ac9c
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.386400] PCI host bridge /pcie@10140000 ranges:
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.391004]  MEM 0x0000000020000000..0x000000002fffffff
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.396074]   IO 0x0000000010160000..0x000000001016ffff
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.412530] rt2880_gpio 10000600.gpio: registering 24 gpios
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.417975] rt2880_gpio 10000600.gpio: registering 24 irq handlers
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.424141] rt2880_gpio 10000638.gpio: registering 16 gpios
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.429542] rt2880_gpio 10000638.gpio: registering 16 irq handlers
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.435665] rt2880_gpio 10000660.gpio: registering 32 gpios
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.441061] rt2880_gpio 10000660.gpio: registering 32 irq handlers
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.447183] rt2880_gpio 10000688.gpio: registering 1 gpios
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.452492] rt2880_gpio 10000688.gpio: registering 1 irq handlers
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.459131] PCI host bridge to bus 0000:00
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.463101] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.469725] pci_bus 0000:00: root bus resource [io  0xffffffff]
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.475479] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.482066] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
Sun Jul  9 09:43:42 2017 kern.debug kernel: [    0.489806] pci 0000:00:00.0: [1814:0801] type 01 class 0x060400
Sun Jul  9 09:43:42 2017 kern.debug kernel: [    0.489855] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Sun Jul  9 09:43:42 2017 kern.debug kernel: [    0.489878] pci 0000:00:00.0: reg 0x14: [mem 0x20200000-0x2020ffff]
Sun Jul  9 09:43:42 2017 kern.debug kernel: [    0.489954] pci 0000:00:00.0: supports D1
Sun Jul  9 09:43:42 2017 kern.debug kernel: [    0.489974] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Sun Jul  9 09:43:42 2017 kern.debug kernel: [    0.490477] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
Sun Jul  9 09:43:42 2017 kern.debug kernel: [    0.490555] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
Sun Jul  9 09:43:42 2017 kern.debug kernel: [    0.490617] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Sun Jul  9 09:43:42 2017 kern.debug kernel: [    0.490717] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Sun Jul  9 09:43:42 2017 kern.debug kernel: [    0.490972] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Sun Jul  9 09:43:42 2017 kern.debug kernel: [    0.490999] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.491055] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.497419] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.504235] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.510775] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.517802] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.524394] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.531519] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.538498] pci 0000:00:00.0: PCI bridge to [bus 01]
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.543332] pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff]
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.549909] pci 0000:00:00.0:   bridge window [mem 0x20100000-0x201fffff pref]
Sun Jul  9 09:43:42 2017 kern.err kernel: [    0.556951] pci 0000:00:00.0: card - bus=0x0, slot = 0x0 irq=0
Sun Jul  9 09:43:42 2017 kern.err kernel: [    0.562592] pci 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.569142] clocksource: Switched to clocksource systick
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.575474] NET: Registered protocol family 2
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.580750] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.587478] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.593705] TCP: Hash tables configured (established 1024 bind 1024)
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.599926] UDP hash table entries: 256 (order: 0, 4096 bytes)
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.605552] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.611917] NET: Registered protocol family 1
Sun Jul  9 09:43:42 2017 kern.debug kernel: [    0.616138] PCI: CLS 80 bytes, default 32
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.620943] rt-timer 10000100.timer: maximum frequency is 1220Hz
Sun Jul  9 09:43:42 2017 kern.warn kernel: [    0.627576] Crashlog allocated RAM at address 0x3f00000
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.648613] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.654281] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.666396] io scheduler noop registered
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.670203] io scheduler deadline registered (default)
Sun Jul  9 09:43:42 2017 kern.err kernel: [    0.675374] ralink-usb-phy usbphy: invalid resource
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.680728] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.690541] console [ttyS0] disabled
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.693989] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.703660] console [ttyS0] enabled
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.710685] bootconsole [early0] disabled
Sun Jul  9 09:43:42 2017 kern.warn kernel: [    0.725406] spi spi0.0: force spi mode3
Sun Jul  9 09:43:42 2017 kern.info kernel: [    0.729962] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    0.734987] 6 ofpart partitions found on MTD device spi0.0
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    0.740632] Creating 6 MTD partitions on "spi0.0":
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    0.745527] 0x000000000000-0x000000020000 : "u-boot"
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    0.752406] 0x000000020000-0x0000007c0000 : "firmware"
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    1.723741] 2 tplink-fw partitions found on MTD device firmware
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    1.729822] 0x000000020000-0x000000148440 : "kernel"
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    1.736468] 0x000000148440-0x0000007c0000 : "rootfs"
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    1.743377] mtd: device 3 (rootfs) set to be root filesystem
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    1.749367] 1 squashfs-split partitions found on MTD device rootfs
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    1.755692] 0x000000375000-0x0000007c0000 : "rootfs_data"
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    1.763047] 0x0000007c0000-0x0000007d0000 : "config"
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    1.769976] 0x0000007d0000-0x0000007e0000 : "rom"
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    1.776573] 0x0000007e0000-0x0000007f0000 : "romfile"
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    1.783655] 0x0000007f0000-0x000000800000 : "radio"
Sun Jul  9 09:43:42 2017 kern.info kernel: [    1.793508] gsw: setting port4 to ephy mode
Sun Jul  9 09:43:42 2017 kern.info kernel: [    1.797829] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 3 link up (100Mbps/Full duplex)
Sun Jul  9 09:43:42 2017 kern.info kernel: [    1.807151] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 4 link up (100Mbps/Full duplex)
Sun Jul  9 09:43:42 2017 kern.info kernel: [    1.816714] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
Sun Jul  9 09:43:42 2017 kern.info kernel: [    1.823613] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
Sun Jul  9 09:43:42 2017 kern.info kernel: [    1.832626] rt2880_wdt 10000120.watchdog: Initialized
Sun Jul  9 09:43:42 2017 kern.info kernel: [    1.839285] NET: Registered protocol family 10
Sun Jul  9 09:43:42 2017 kern.info kernel: [    1.848255] NET: Registered protocol family 17
Sun Jul  9 09:43:42 2017 kern.info kernel: [    1.852950] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Sun Jul  9 09:43:42 2017 kern.info kernel: [    1.865831] 8021q: 802.1Q VLAN Support v1.8
Sun Jul  9 09:43:42 2017 kern.info kernel: [    1.884646] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Sun Jul  9 09:43:42 2017 kern.info kernel: [    1.892810] Freeing unused kernel memory: 164K (80377000 - 803a0000)
Sun Jul  9 09:43:42 2017 user.info kernel: [    3.990388] init: Console is alive
Sun Jul  9 09:43:42 2017 user.info kernel: [    3.994066] init: - watchdog -
Sun Jul  9 09:43:42 2017 user.info kernel: [    5.460481] init: - preinit -
Sun Jul  9 09:43:42 2017 kern.info kernel: [    6.369590] 8021q: adding VLAN 0 to HW filter on device eth0
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    6.525892] random: procd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    7.976113] jffs2: notice: (355) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Sun Jul  9 09:43:42 2017 user.info kernel: [    8.001910] mount_root: switching to jffs2 overlay
Sun Jul  9 09:43:42 2017 user.warn kernel: [    8.023422] urandom-seed: Seeding with /etc/urandom.seed
Sun Jul  9 09:43:42 2017 user.info kernel: [    8.169811] procd: - early -
Sun Jul  9 09:43:42 2017 user.info kernel: [    8.172859] procd: - watchdog -
Sun Jul  9 09:43:42 2017 user.info kernel: [    8.506340] procd: - ubus -
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    8.725716] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    8.737711] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    8.747469] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    8.756780] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    8.766362] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    8.776188] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    8.787182] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
Sun Jul  9 09:43:42 2017 kern.notice kernel: [    8.796632] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
Sun Jul  9 09:43:42 2017 user.info kernel: [    8.806247] procd: - init -
Sun Jul  9 09:43:42 2017 kern.info kernel: [    9.793416] usbcore: registered new interface driver usbfs
Sun Jul  9 09:43:42 2017 kern.info kernel: [    9.799125] usbcore: registered new interface driver hub
Sun Jul  9 09:43:42 2017 kern.info kernel: [    9.804759] usbcore: registered new device driver usb
Sun Jul  9 09:43:42 2017 kern.info kernel: [    9.823476] ip6_tables: (C) 2000-2006 Netfilter Core Team
Sun Jul  9 09:43:42 2017 kern.info kernel: [    9.839066] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
Sun Jul  9 09:43:42 2017 kern.info kernel: [    9.847313] Backport generated by backports.git backports-20160324-13-g24da7d3c
Sun Jul  9 09:43:42 2017 kern.info kernel: [    9.912959] mt76x2e 0000:01:00.0: ASIC revision: 76120044
Sun Jul  9 09:43:42 2017 kern.info kernel: [    9.931581] mt76x2e 0000:01:00.0: ROM patch already applied
Sun Jul  9 09:43:42 2017 kern.info kernel: [   10.288355] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
Sun Jul  9 09:43:42 2017 kern.info kernel: [   10.294005] mt76x2e 0000:01:00.0: Build: 1
Sun Jul  9 09:43:42 2017 kern.info kernel: [   10.298188] mt76x2e 0000:01:00.0: Build Time: 201507311614____
Sun Jul  9 09:43:42 2017 kern.info kernel: [   10.319545] mt76x2e 0000:01:00.0: Firmware running!
Sun Jul  9 09:43:42 2017 kern.debug kernel: [   10.326083] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Sun Jul  9 09:43:42 2017 kern.info kernel: [   10.417731] ip_tables: (C) 2000-2006 Netfilter Core Team
Sun Jul  9 09:43:42 2017 kern.info kernel: [   10.432629] nf_conntrack version 0.5.0 (954 buckets, 3816 max)
Sun Jul  9 09:43:42 2017 kern.info kernel: [   10.511144] xt_time: kernel timezone is -0000
Sun Jul  9 09:43:42 2017 kern.info kernel: [   10.518568] usbcore: registered new interface driver cdc_ether
Sun Jul  9 09:43:42 2017 kern.info kernel: [   10.549021] PPP generic driver version 2.4.2
Sun Jul  9 09:43:42 2017 kern.info kernel: [   10.649988] NET: Registered protocol family 24
Sun Jul  9 09:43:42 2017 kern.info kernel: [   10.656941] usbcore: registered new interface driver rndis_host
Sun Jul  9 09:43:42 2017 kern.info kernel: [   10.680819] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "radio"
Sun Jul  9 09:43:42 2017 kern.info kernel: [   10.688038] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5390, rev 0500 detected
Sun Jul  9 09:43:42 2017 kern.info kernel: [   10.696010] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 7620 detected
Sun Jul  9 09:43:42 2017 kern.debug kernel: [   10.703735] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Sun Jul  9 09:43:42 2017 kern.notice kernel: [   12.104880] random: jshn: uninitialized urandom read (4 bytes read, 23 bits of entropy available)
Sun Jul  9 09:43:44 2017 user.notice : Added device handler type: 8021ad
Sun Jul  9 09:43:44 2017 user.notice : Added device handler type: 8021q
Sun Jul  9 09:43:44 2017 user.notice : Added device handler type: macvlan
Sun Jul  9 09:43:44 2017 user.notice : Added device handler type: bridge
Sun Jul  9 09:43:44 2017 user.notice : Added device handler type: Network device
Sun Jul  9 09:43:44 2017 user.notice : Added device handler type: tunnel
Sun Jul  9 09:43:44 2017 user.notice : 'radio0' is disabled
Sun Jul  9 09:43:44 2017 user.notice : 'radio1' is disabled
Sun Jul  9 09:43:44 2017 user.notice : 'radio0' is disabled
Sun Jul  9 09:43:44 2017 user.notice : 'radio1' is disabled
Sun Jul  9 09:43:46 2017 authpriv.info dropbear[783]: Not backgrounding
Sun Jul  9 09:43:47 2017 user.notice : setting up led power
Sun Jul  9 09:43:47 2017 user.notice : setting up led lan
Sun Jul  9 09:43:47 2017 user.notice : setting up led wan
Sun Jul  9 09:43:47 2017 user.notice : setting up led USB
Sun Jul  9 09:43:47 2017 user.notice : /etc/rc.common: eval: line 1: can't create /sys/class/leds/c50:green:usb/ports/usb1-port1: nonexistent directory
Sun Jul  9 09:43:47 2017 user.notice : setting up led wlan2g
Sun Jul  9 09:43:48 2017 user.notice : setting up led wifi
Sun Jul  9 09:43:49 2017 kern.info kernel: [   19.308150] 8021q: adding VLAN 0 to HW filter on device eth0
Sun Jul  9 09:43:49 2017 kern.info kernel: [   19.333850] device eth0.1 entered promiscuous mode
Sun Jul  9 09:43:49 2017 kern.info kernel: [   19.338758] device eth0 entered promiscuous mode
Sun Jul  9 09:43:49 2017 kern.info kernel: [   19.353264] br-lan: port 1(eth0.1) entered forwarding state
Sun Jul  9 09:43:49 2017 kern.info kernel: [   19.358998] br-lan: port 1(eth0.1) entered forwarding state
Sun Jul  9 09:43:49 2017 daemon.notice netifd: Interface 'lan' is enabled
Sun Jul  9 09:43:49 2017 daemon.notice netifd: Interface 'lan' is setting up now
Sun Jul  9 09:43:49 2017 daemon.notice netifd: Interface 'lan' is now up
Sun Jul  9 09:43:49 2017 daemon.notice netifd: Interface 'loopback' is enabled
Sun Jul  9 09:43:49 2017 daemon.notice netifd: Interface 'loopback' is setting up now
Sun Jul  9 09:43:49 2017 daemon.notice netifd: Interface 'loopback' is now up
Sun Jul  9 09:43:49 2017 daemon.notice netifd: Interface 'wan' is enabled
Sun Jul  9 09:43:49 2017 daemon.notice netifd: Interface 'wan6' is enabled
Sun Jul  9 09:43:49 2017 daemon.info odhcpd[745]: Raising SIGUSR1 due to address change on br-lan
Sun Jul  9 09:43:49 2017 daemon.notice netifd: bridge 'br-lan' link is up
Sun Jul  9 09:43:49 2017 daemon.notice netifd: Interface 'lan' has link connectivity 
Sun Jul  9 09:43:49 2017 daemon.notice netifd: Network device 'eth0' link is up
Sun Jul  9 09:43:49 2017 daemon.notice netifd: VLAN 'eth0.1' link is up
Sun Jul  9 09:43:49 2017 daemon.notice netifd: Network device 'lo' link is up
Sun Jul  9 09:43:49 2017 daemon.notice netifd: Interface 'loopback' has link connectivity 
Sun Jul  9 09:43:49 2017 daemon.notice netifd: VLAN 'eth0.2' link is up
Sun Jul  9 09:43:49 2017 daemon.notice netifd: Interface 'wan' has link connectivity 
Sun Jul  9 09:43:49 2017 daemon.notice netifd: Interface 'wan' is setting up now
Sun Jul  9 09:43:49 2017 daemon.notice netifd: Interface 'wan6' has link connectivity 
Sun Jul  9 09:43:49 2017 daemon.notice netifd: Interface 'wan6' is setting up now
Sun Jul  9 09:43:49 2017 daemon.notice netifd: wan (912): udhcpc: started, v1.25.1
Sun Jul  9 09:43:50 2017 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Sun Jul  9 09:43:50 2017 daemon.info odhcpd[745]: Using a RA lifetime of 0 seconds on br-lan
Sun Jul  9 09:43:50 2017 daemon.notice odhcpd[745]: Failed to send to ff02::1%br-lan (Address not available)
Sun Jul  9 09:43:50 2017 daemon.notice netifd: wan (912): udhcpc: sending discover
Sun Jul  9 09:43:50 2017 daemon.err odhcp6c[915]: Failed to send DHCPV6 message to ff02::1:2 (Address not available)
Sun Jul  9 09:43:50 2017 daemon.info procd: - init complete -
Sun Jul  9 09:43:51 2017 kern.info kernel: [   21.212929] br-lan: port 1(eth0.1) entered forwarding state
Sun Jul  9 09:43:52 2017 user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override
Sun Jul  9 09:43:52 2017 daemon.info dnsmasq[1029]: started, version 2.76 cachesize 150
Sun Jul  9 09:43:52 2017 daemon.info dnsmasq[1029]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Sun Jul  9 09:43:52 2017 daemon.info dnsmasq[1029]: DNS service limited to local subnets
Sun Jul  9 09:43:52 2017 daemon.info dnsmasq[1029]: using local addresses only for domain lan
Sun Jul  9 09:43:52 2017 daemon.warn dnsmasq[1029]: no servers found in /tmp/resolv.conf.auto, will retry
Sun Jul  9 09:43:52 2017 daemon.info dnsmasq[1029]: read /etc/hosts - 4 addresses
Sun Jul  9 09:43:52 2017 daemon.info dnsmasq[1029]: read /tmp/hosts/odhcpd - 0 addresses
Sun Jul  9 09:43:52 2017 daemon.info dnsmasq[1029]: read /tmp/hosts/dhcp.cfg02411c - 2 addresses
Sun Jul  9 09:43:53 2017 daemon.notice netifd: wan (912): udhcpc: sending discover
Sun Jul  9 09:43:56 2017 daemon.notice netifd: wan (912): udhcpc: sending discover
Sun Jul  9 09:44:01 2017 daemon.notice odhcpd[745]: Got DHCPv6 request
Sun Jul  9 09:44:41 2017 kern.notice kernel: [   42.206731] random: nonblocking pool is initialized
Kernel Log

Код: Выделить всё

[    0.000000] Linux version 4.4.61 (buildbot@builds-02.infra.lede-project.org) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3103-1b51a49) ) #0 Sat Apr 15 16:13:45 2017
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7620A ver:2 eco:6
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
[    0.000000] MIPS: machine is TP-Link Archer C50
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 8035a4b0, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=0007cab0
[    0.000000] Readback ErrCtl register=0007cab0
[    0.000000] Memory: 60944K/65536K available (3013K kernel code, 143K rwdata, 384K rodata, 164K init, 208K bss, 4592K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] CPU Clock: 580MHz
[    0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
[    0.000000] systick: enable autosleep mode
[    0.000000] systick: running - mult: 214748, shift: 32
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[    0.000011] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[    0.007578] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.070077] pid_max: default: 32768 minimum: 301
[    0.074701] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.081070] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.094732] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.104276] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.110233] pinctrl core: initialized pinctrl subsystem
[    0.116543] NET: Registered protocol family 16
[    0.126362] Can't analyze schedule() prologue at 8000ac9c
[    0.386400] PCI host bridge /pcie@10140000 ranges:
[    0.391004]  MEM 0x0000000020000000..0x000000002fffffff
[    0.396074]   IO 0x0000000010160000..0x000000001016ffff
[    0.412530] rt2880_gpio 10000600.gpio: registering 24 gpios
[    0.417975] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[    0.424141] rt2880_gpio 10000638.gpio: registering 16 gpios
[    0.429542] rt2880_gpio 10000638.gpio: registering 16 irq handlers
[    0.435665] rt2880_gpio 10000660.gpio: registering 32 gpios
[    0.441061] rt2880_gpio 10000660.gpio: registering 32 irq handlers
[    0.447183] rt2880_gpio 10000688.gpio: registering 1 gpios
[    0.452492] rt2880_gpio 10000688.gpio: registering 1 irq handlers
[    0.459131] PCI host bridge to bus 0000:00
[    0.463101] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
[    0.469725] pci_bus 0000:00: root bus resource [io  0xffffffff]
[    0.475479] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.482066] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.489806] pci 0000:00:00.0: [1814:0801] type 01 class 0x060400
[    0.489855] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    0.489878] pci 0000:00:00.0: reg 0x14: [mem 0x20200000-0x2020ffff]
[    0.489954] pci 0000:00:00.0: supports D1
[    0.489974] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.490477] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000
[    0.490555] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    0.490617] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.490717] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.490972] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.490999] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[    0.491055] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    0.497419] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    0.504235] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
[    0.510775] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
[    0.517802] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
[    0.524394] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
[    0.531519] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
[    0.538498] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.543332] pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff]
[    0.549909] pci 0000:00:00.0:   bridge window [mem 0x20100000-0x201fffff pref]
[    0.556951] pci 0000:00:00.0: card - bus=0x0, slot = 0x0 irq=0
[    0.562592] pci 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
[    0.569142] clocksource: Switched to clocksource systick
[    0.575474] NET: Registered protocol family 2
[    0.580750] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.587478] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.593705] TCP: Hash tables configured (established 1024 bind 1024)
[    0.599926] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.605552] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.611917] NET: Registered protocol family 1
[    0.616138] PCI: CLS 80 bytes, default 32
[    0.620943] rt-timer 10000100.timer: maximum frequency is 1220Hz
[    0.627576] Crashlog allocated RAM at address 0x3f00000
[    0.648613] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.654281] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.666396] io scheduler noop registered
[    0.670203] io scheduler deadline registered (default)
[    0.675374] ralink-usb-phy usbphy: invalid resource
[    0.680728] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.690541] console [ttyS0] disabled
[    0.693989] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
[    0.703660] console [ttyS0] enabled
[    0.710685] bootconsole [early0] disabled
[    0.725406] spi spi0.0: force spi mode3
[    0.729962] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
[    0.734987] 6 ofpart partitions found on MTD device spi0.0
[    0.740632] Creating 6 MTD partitions on "spi0.0":
[    0.745527] 0x000000000000-0x000000020000 : "u-boot"
[    0.752406] 0x000000020000-0x0000007c0000 : "firmware"
[    1.723741] 2 tplink-fw partitions found on MTD device firmware
[    1.729822] 0x000000020000-0x000000148440 : "kernel"
[    1.736468] 0x000000148440-0x0000007c0000 : "rootfs"
[    1.743377] mtd: device 3 (rootfs) set to be root filesystem
[    1.749367] 1 squashfs-split partitions found on MTD device rootfs
[    1.755692] 0x000000375000-0x0000007c0000 : "rootfs_data"
[    1.763047] 0x0000007c0000-0x0000007d0000 : "config"
[    1.769976] 0x0000007d0000-0x0000007e0000 : "rom"
[    1.776573] 0x0000007e0000-0x0000007f0000 : "romfile"
[    1.783655] 0x0000007f0000-0x000000800000 : "radio"
[    1.793508] gsw: setting port4 to ephy mode
[    1.797829] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 3 link up (100Mbps/Full duplex)
[    1.807151] mtk_soc_eth 10100000.ethernet eth0 (uninitialized): port 4 link up (100Mbps/Full duplex)
[    1.816714] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
[    1.823613] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
[    1.832626] rt2880_wdt 10000120.watchdog: Initialized
[    1.839285] NET: Registered protocol family 10
[    1.848255] NET: Registered protocol family 17
[    1.852950] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.865831] 8021q: 802.1Q VLAN Support v1.8
[    1.884646] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[    1.892810] Freeing unused kernel memory: 164K (80377000 - 803a0000)
[    3.990388] init: Console is alive
[    3.994066] init: - watchdog -
[    5.460481] init: - preinit -
[    6.369590] 8021q: adding VLAN 0 to HW filter on device eth0
[    6.525892] random: procd: uninitialized urandom read (4 bytes read, 10 bits of entropy available)
[    7.976113] jffs2: notice: (355) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    8.001910] mount_root: switching to jffs2 overlay
[    8.023422] urandom-seed: Seeding with /etc/urandom.seed
[    8.169811] procd: - early -
[    8.172859] procd: - watchdog -
[    8.506340] procd: - ubus -
[    8.725716] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
[    8.737711] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
[    8.747469] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
[    8.756780] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
[    8.766362] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
[    8.776188] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
[    8.787182] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
[    8.796632] random: ubusd: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
[    8.806247] procd: - init -
[    9.793416] usbcore: registered new interface driver usbfs
[    9.799125] usbcore: registered new interface driver hub
[    9.804759] usbcore: registered new device driver usb
[    9.823476] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    9.839066] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
[    9.847313] Backport generated by backports.git backports-20160324-13-g24da7d3c
[    9.912959] mt76x2e 0000:01:00.0: ASIC revision: 76120044
[    9.931581] mt76x2e 0000:01:00.0: ROM patch already applied
[   10.288355] mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
[   10.294005] mt76x2e 0000:01:00.0: Build: 1
[   10.298188] mt76x2e 0000:01:00.0: Build Time: 201507311614____
[   10.319545] mt76x2e 0000:01:00.0: Firmware running!
[   10.326083] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.417731] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.432629] nf_conntrack version 0.5.0 (954 buckets, 3816 max)
[   10.511144] xt_time: kernel timezone is -0000
[   10.518568] usbcore: registered new interface driver cdc_ether
[   10.549021] PPP generic driver version 2.4.2
[   10.649988] NET: Registered protocol family 24
[   10.656941] usbcore: registered new interface driver rndis_host
[   10.680819] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "radio"
[   10.688038] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5390, rev 0500 detected
[   10.696010] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 7620 detected
[   10.703735] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   12.104880] random: jshn: uninitialized urandom read (4 bytes read, 23 bits of entropy available)
[   19.308150] 8021q: adding VLAN 0 to HW filter on device eth0
[   19.333850] device eth0.1 entered promiscuous mode
[   19.338758] device eth0 entered promiscuous mode
[   19.353264] br-lan: port 1(eth0.1) entered forwarding state
[   19.358998] br-lan: port 1(eth0.1) entered forwarding state
[   21.212929] br-lan: port 1(eth0.1) entered forwarding state
[   42.206731] random: nonblocking pool is initialized

vovan26
OpenWrt разработчик
OpenWrt разработчик
Сообщения: 2493
Зарегистрирован: 12 мар 2014, 17:20
Страна: Узбкистан
Откуда: Узбекистан

Re: Archer C50 @ Chaos Calmer 15.05 + ZTE MF710M

Сообщение vovan26 » 09 июл 2017, 12:43

То Cenobit:
У тебя прошивка от другого разработчика и отношение к lede она имеет лишь только что обе собраны на базе OpenWrt.
Разработка ПО для роутеров на базе OpenWrt.
Желание получить ответ, предполагает умение сформулировать вопрос. (И.В. Сталин)
На общие вопросы в личке не отвечаю, задайте его на форуме.

Cenobit
Лучший пользователь 2013-2017
Лучший пользователь 2013-2017
Сообщения: 2737
Зарегистрирован: 24 июн 2013, 05:57
Страна: Россия

Re: Archer C50 @ Chaos Calmer 15.05 + ZTE MF710M

Сообщение Cenobit » 09 июл 2017, 12:45

WhatAmIdoingHere писал(а):WAN
Нету его в списке сетевых адаптеров...а это значит, что "переключалка" в прошивке не корректно работает с эти свистком...почему - вопрос отдельный...
vovan26 писал(а):Какая морда свистка если его в девайсах нету?
Я уже неоднократно говорил ранее, что не все с Линухом на "ты"...я всегда предлагаю способ для мало-, а то и вовсе не "рубящих" в этих делах юзеров...и не нужны никакие сислоги, когда у прошивки роутера есть веб-морда, чтобы понять, видит ли он свисток или не видит...
TL-MR3220 v2 + Huawei E3372, ZTE MF823

Cenobit
Лучший пользователь 2013-2017
Лучший пользователь 2013-2017
Сообщения: 2737
Зарегистрирован: 24 июн 2013, 05:57
Страна: Россия

Re: Archer C50 @ Chaos Calmer 15.05 + ZTE MF710M

Сообщение Cenobit » 09 июл 2017, 12:47

vovan26 писал(а):То Cenobit:
У тебя прошивка от другого разработчика и отношение к lede она имеет лишь только что обе собраны на базе OpenWrt.
А то я не в курсе... :mrgreen:
Юзал я недавно крайнюю сборку от LEDE...ставил пакеты...поэтому, знаю, что пишу... ;)
TL-MR3220 v2 + Huawei E3372, ZTE MF823

WhatAmIdoingHere
Сообщения: 38
Зарегистрирован: 08 июл 2017, 10:36
Страна: Россия

Re: Archer C50 @ Chaos Calmer 15.05 + ZTE MF710M

Сообщение WhatAmIdoingHere » 09 июл 2017, 12:52

А пакет usb-modeswitch-data не нужен?

Может, откатиться на обычный OpenWRT? На нём хоть свисток был виден (правда, не как свисток)

vovan26
OpenWrt разработчик
OpenWrt разработчик
Сообщения: 2493
Зарегистрирован: 12 мар 2014, 17:20
Страна: Узбкистан
Откуда: Узбекистан

Re: Archer C50 @ Chaos Calmer 15.05 + ZTE MF710M

Сообщение vovan26 » 09 июл 2017, 13:05

То WhatAmIdoingHere:
У вас в сислоге нету никаких упоминаний о новых интерфейсах и о USB в частности.
Разработка ПО для роутеров на базе OpenWrt.
Желание получить ответ, предполагает умение сформулировать вопрос. (И.В. Сталин)
На общие вопросы в личке не отвечаю, задайте его на форуме.

WhatAmIdoingHere
Сообщения: 38
Зарегистрирован: 08 июл 2017, 10:36
Страна: Россия

Re: Archer C50 @ Chaos Calmer 15.05 + ZTE MF710M

Сообщение WhatAmIdoingHere » 09 июл 2017, 13:10

И lsusb выдаёт:
unable to initialize libusb: -99.
Поэтому я и думаю откатиться на прошивку, которая хотя бы видела устройство

Ответить

Вернуться в «Альтернативные прошивки на основе OPEN-WRT (openwrt.org)»